Do you want to control your computer’s mouse from the projector’s remote or keypad?
If your computer has a PS/2 connector, use the PS/2 mouse cable
1Unplug the mouse cable from your computer.
2Plug the 
end of the CableWizard mouse cable into the mouse connector on your computer.
3Plug the 
end of the CableWizard mouse cable into the 
connector on the CableWizard.
audio cable
mouse cable
monitor cable
FIGURE 9
Connecting the CableWizard monitor, audio and mouse cables to a desktop computer
If your computer has a USB connector and is running Windows 98, use the USB mouse cable
1Plug the 
end of the CableWizard mouse cable into the mouse connector on your computer.
2Plug the 
end of the CableWizard mouse cable into the 
connector on the CableWizard.
You must have the appropriate USB drivers installed on you computer to use the USB feature. Windows 98 ships with the appropriate drivers.
Now you’re ready to power up the projector and your computer. Skip to “Powering up the Projector and Adjusting the Image” on page 15.
NOTE: A USB mouse is
NOTE: The USB mouse is sup- ported for use with Windows 98 only.
11
