InFocus LP755 manual Video cable Cable

S e t t i n g u p t h e P r o j e c t o r

CAUTION: Your video player may also have a “Video Out” port for a coaxial cable connection. DO NOT use this to connect to the projector.

S-video cable

A/V cable

FIGURE 12

Connecting the projector to a video player using an S-video cable and the audio con- nectors on the standard A/V cable

4Plug the A/V cable’s white connector into the left “audio out” port on your video player. Plug the cable’s red connector into the right “audio out” port on the video player (Figure 11 and Figure 12).

•If you’re using an S-video cable, the yellow connectors on the A/V cable remain unused (Figure 12).

5Plug the A/V cable’s other white and red connectors to the left and right “audio in” ports on the projector.

The projector is compatible with these major broadcast video standards: NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, and SECAM. It automatically adjusts to optimize its performance for the incoming video. The input signals for SECAM, PAL-M, and PAL-N video cannot be automatically detected, therefore they must be chosen manually; see “Video Standard” on page 31.

14