Manuals / InFocus / Computer Equipment / Projector

InFocus P1501, IN1503 Startup Screen, The video embedded in my PowerPoint, Lamp turns on, Problem

Models: IN1503 P1501

1 40

Page 20

Problem	Solution
The video embedded in my PowerPoint	If your computer is using the projector's DisplayLink
presentation does not play on the screen	connector, see the DisplayLink Software User's Guide
	for video troubleshooting information.
A	Turn off the internal LCD display on your laptop
A
A
B

Lamp won’t turn on, Temperature light is on	Make sure vents aren’t blocked, turn off the projector
	and allow it to cool for one minute

Result

Embedded video plays correctly

A	B

Lamp turns on

Temperature light

Startup Screen

Page 20

Image 20

InFocus P1501 Startup Screen, The video embedded in my PowerPoint, presentation does not play on the screen, Lamp turns on

Contents

009-1313-02 DISPERINDAG No. 0287/1.824.51/09.03 IN1501, IN1503Regulatory models P1501, P1503 Declaration of Conformity TrademarksFCC Warning CanadaTable of Contents Important Operating Considerations for Safety Product specifications AccessoriesIntroduction Online registrationConnector panel Positioning the projector IN1501IN1503 Table 1 IN150190/2.3 55/1.466/1.7 150/3.8Connecting a computer source Connecting powerDisplayLink VGA connectionDisplaying an image ? No start up screen? Get help on pageAdjusting the image 169 screen 43 mode 169 mode Native mode NTSC only What is Aspect Ratio?43 screen Connecting a video device Composite video connectionHDMI 1.3 connection VGA connectionTroubleshooting your setup Table 3 Status indicator light behavior and meaningShutting down the projector Screen Save TimeProblem No start up screen SolutionPlug power cord into the projector press power buttonProblem No computer image, just the words “Signal out of range” Only my laptop’s background appears, not the Desktop iconsResult Computer image projected Background and Desktop projectedProblem Set your computer’s display resolution to the nativeresolution of the projector Start Settings Control Panel Display Settings tabAdjust Keystone on keypad Adjust Sharpness in the Basic Picture menuImage not square Square imageTurn off Ceiling Mount in Setup menu Turn off Rear Project in Setup menuAdjust color, tint, brightness, contrast in the Basic Image upside downThe video embedded in my PowerPoint for video troubleshooting informationLamp won’t turn on, Temperature light is on Startup Screen“Replace lamp” message appears at startup, lamp Lamp must be replaced see pagewon’t turn on, Lamp light is turned on lamp doorUsing the remote control Troubleshooting the remoteTroubleshooting Audio Using the audioUsing the projector’s speakers Using the keypad buttons Presentation features Optimizing computer imagesOptimizing video images Customizing the projectorUsing the menus Basic Picture menu Advanced Picture menu Setup menu To enter the PIN at projector startup To change the PINStatus and Service menu Source Info a read-only display of current source settingsProjector Info a read-only display of current projector settings Factory Reset restores all settings to their defaultUsing LitePort IN1503 only Using the LitePort MenuImage File Types Viewing a Slide ShowDisplaying PowerPoint Slides Troubleshooting LitePort Maintenance Using the security lockCleaning the lens WARNINGSReplacing the projection lamp WARNINGSPage I Image INDEXNumerics

The video embedded in my PowerPoint

presentation does not play on the screen

for video troubleshooting information.

Turn off the internal LCD display on your laptop

Lamp won’t turn on, Temperature light is on

and allow it to cool for one minute

Result

Lamp turns on

Startup Screen