1Turn off the projector and unplug the power cord.
2Wait 60 minutes to allow the projector to cool thoroughly.
3Remove the lamp door by (a) removing the screw on the side of the lamp door,
(b) lifting the door off.
4Loosen the captive screw that attaches the lamp housing to the projector. Carefully remove the lamp housing. Dispose of the lamp in an environmentally proper manner.
5Install the new lamp housing and tighten the screw.
6
7Replace the lamp door by sliding it into place.
8Plug in the power cord and press the Power button to turn the projector back on.
9To reset the lamp hour timer, navigate to the Status and Service menu and select Reset Lamp Hours. See page 31 for details.
turn off and unplug | wait 60 minutes |
projector |
|
(a) 
(b)
loosen screw
37
