Shutting down the projector
1. Press II Power and a confirmation message will display prompting you.
If you don't respond in a few seconds, the message will disappear.
2. Press II Power a second time. The Power indicator light flashes orange, the projection lamp shuts down, and the fans will continue to run for approximately 90 seconds to cool down the projector.
CAUTION
•To protect the lamp, the projector will not respond to any commands during the cooling process.
•To shorten the cooling time, you can also activate the Quick cooling function. See "Quick Cooling" on page 48 for details.
3.Once the cooling process finishes, the Power
indicator light is a steady orange and fans stop. Disconnect the power cord from the wall socket.
If the projector is not properly shut down, to protect the lamp, when you attempt to
42 Operation
