7.Tighten the screw that secures the lamp.
CAUTION
•Loose screw may cause a bad connection, which could result in malfunction.
•Do not over tighten the screw.
8.Ensure the handle is fully laid flat and locked in place.
9.Replace the lamp cover on the projector.
10.Use a coin to turn the screw clockwise until the lamp cover is secured.
CAUTION
•Loose screw may cause a bad connection, which could result in malfunction.
•Do not over tighten the screw.
11.Restart the projector.
Resetting the lamp timer
12.After the startup logo, open the On- Screen Display (OSD) menu. Go to the SYSTEM SETUP: Advanced > Lamp Settings menu. Press Mode/Enter. The Lamp Settings page displays. Highlight Reset Lamp Timer. A warning message displays asking if you want to reset the lamp timer. Highlight Reset and press Mode/Enter. The lamp time will be reset to '0'.
CAUTION
•Do not reset if the lamp is not new or replaced as this could cause damage.
Notice
Reset Lamp Timer?
Reset Cancel
Maintenance 55
