InFocus XS1 manual Magnifying and searching for details on the projected picture

Magnifying and searching for details on the projected picture

If you need to find the details on the projected picture, magnify the picture. Use the direction arrow keys for navigating the picture.

•Using the remote control

1.Press Digital Zoom +/- to display the Zoom bar. Press Digital Zoom + to magnify the center of the picture. Press the key repeatedly until the picture size is suitable for your need.

2.Use the directional arrows (, , , ) on the projector or remote control to navigate the picture.

3.To restore the picture to its original size, press AUTO. You can also press Digital Zoom -. When the key is pressed again, the picture is further reduced until it is restored to the original size.

The picture can only be navigated after the picture is magnified. You can further magnify the picture while searching for details.

•Using the OSD menu

1.Press Menu/Exit and then press / until the DISPLAY menu is highlighted.

2.Press to highlight Digital Zoom and press Mode/Enter. The Zoom bar displays.

3.Press repeatedly to magnify the picture to a desired size.

4.To navigate the picture, press Mode/Enter to switch to the paning mode and

press the directional arrows (, , , ) on the projector or remote control to navigate the picture.

5.To reduce size of the picture, press Mode/Enter to switch back to the zoom in/out function, and press AUTO to restore the picture to its original size. You can also press repeatedly until it is restored to the original size.

Operation 31