InFocus XS1 manual Setting the presentation timer, Go to the System Setup Basic

Setting the presentation timer

The presentation timer can indicate the presentation time on the screen to help you achieve better time management when giving presentations. Follow these steps to utilize this function:

1.	Go to the SYSTEM SETUP: Basic >	Presentation Timer
	Presentation Timer menu and press Mode/
		Timer Period	15
	Enter to display the Presentation Timer	Timer Display	Always
		Timer Position	Top-Left
	page.	Timer Counting Direction	Count Down
2.		Sound Reminder	Off
	Highlight Timer Period and decide the time	On	Off

period by pressing / . The length of time	MENU Back
can be set from 1 to 5 minutes in 1-minute

increments and 5 to 240 minutes in 5-minute increments.

If the timer is already on, the timer will restart whenever the Timer Period is reset.

3.Press to highlight Timer Display and choose if you want the timer to show up on the screen by pressing / .

Selection	Description
Always	Displays the timer on screen throughout the presentation time.
1 min/2 min/3 min	Displays the timer on screen in the last 1/2/3 minute(s).
Never	Hides the timer throughout the presentation time.

4.Press to highlight Timer Position and set the timer position by pressing

/ .

Top-Left Bottom-Left Top-Right Bottom-Right

5.Press to highlight Timer Counting Direction and select your desired counting direction by pressing / .

Selection	Description
Count Up	Increases from 0 to the preset time.
Count down	Decreases from the preset time to 0.

6.Press to highlight Sound Reminder and decide if you want to activate sound reminder by pressing / . If you select On, a double beep sound will be heard at the last 30 seconds of counting down/up, and a triple beep sound will be produced when the timer is up.

7.To activate the presentation timer, press and press / to highlight On and press Mode/Enter.

8.A confirmation message displays. Highlight Yes and press Mode/Enter to confirm. You will see the message “Timer is On” displaying on the screen. The timer start counting at the time the timer is on.

38 Operation