Checking or Cancelling Timer Recordings | Magnavox VRX562AT99

Timer Recording (cont’d) 37

Checking or Cancelling Timer Recordings

1

With the VCR on and in VCR position (the VCR light will appear on the display panel), press the VCR button, then press the

MENU button.

2

Press the Number 1 button to select PROGRAM.

3

Press the Number 4 button to select PROGRAM REVIEW. The timer recording information for the program in the lowest numbered slot will appear on-screen. If no timer recordings are set, nothing will happen when you press the Number 4 button.

4

Press the Number 1 button repeatedly to review all pro- grammed timer recordings. If you don’t press the Number 1 but- ton in 10 seconds, the VCR will automatically display information about the next programmed timer recording. This will continue until all timer recordings have been displayed. Then the menu will disappear.

5

To cancel the timer recording displayed, press the CLEAR button. Either the display will disappear or information about other timer recordings will appear. If you do not press any other buttons, the display will disappear after all timer recordings have been displayed.

6

Repeat steps 1 - 4 to make sure you have cleared the cor- rect timer recording.

CBL/DSS

VCR

TV

	PAUSE	POWER		VCR PLUS+	5
	PAUSE			/ENTER
	/STILL			/ENTER
	/STILL
1	SLOW			F.ADV
	STATUS/EXIT			CLEAR	2
		MENU
	V			C
	V	VOL	CH	C
3	1		2	3	&
	4		5	6	&
	7		8	9	4
	100		0	A.CH
	REC/OTR	INDEX	SKIP
	REC/OTR	SEARCH	SEARCH	VCR/TV
	SPEED	MEMORY
	EJECT	X2 PLAY	VAR.SLOW	TRACKING
	MUTE		TIME SEARCH REC END SEARCH

JOG & SHUTTLE

Helpful Hints

•CLASH may flash on the screen when you finish setting a timer recording. This means that the timer recording you just pro- grammed and another timer record- ing overlap, and thus the current timer recording will not be carried out. In this case, cancel the overlap- ping timer recording.

•If the preset time for a timer recording comes up during an OTR, the OTR has priority.

•To stop a started timer recording, press the STOP/EJECT button on the VCR.

•If the power fails for more than one hour, programmed timer recordings will be lost. If this occurs, reset the

clock before re-programming the timer recording(s).

See page 58 for more hints.

Image 37

Magnavox VRX562AT99 Checking or Cancelling Timer Recordings, Menu button Press the Number 1 button to select Program

Contents

VRX562AT For Customer Use Dear Philips Magnavox product owner Safety Precautions FeaturesIntroduction Table of Contents Using the Remote Control Putting Batteries in the Remote ControlVCR maintenance Erasure Prevention Disconnect the antenna or cable from your TV Hookups Without a Cable Box Plug in the TV and the VCR Hookups Without a Cable Box cont’d Hookups With a Cable Box/DSS Receiver Timer RecordingsRecording/Viewing Any Channel Watching TV With the VCR Off Recording One Channel/Watching Another Hookups With a Cable Box/DSS Receiver cont’dPlaying a Tape Press the Play button to play the tape Hookups With a Stereo TV 1Turn on the TV Turning on Your VCR Channel Memory Press the Number 3 button to select Tuner SET UPProgramming Channels Press the VCR button Adding/Deleting Channels Channel Memory cont’dReviewing Programmed Channels Use the Number buttons to enter the channel number Manual Clock Setting Setting the ClockPress the Number 4 button to select SET Clock Press the Number 2 button to select SET Manual Clock Setting the Clock cont’d Automatic Clock Setting Setting the Clock cont’dPress the VCR button, then press the Menu button to Bring up the main menu display Press the Number 4 button to select SET Time Zone Time Zone Daylight-Saving Time Selection Daylight-Saving Time Selection Language Selection Press the Number 2 button to select VCR SET UPLanguage Selection Press the Number 4 button to select Language 2Find your TV code Press and release the Mute button 2System code Find your Cable Box/Satellite Remote Locator If another remote control beepsLetting your VCR find your remote for you Press the Mute button, then the PAUSE/STILL button VCR Button CBL/DSS ButtonTV Button Rewind Button Remote Control Buttons cont’d Stop Button Slow ButtonMenu Button Frame. ADVance Button On-Screen Status Displays Press the Number 2 button to select on Screen ModeTo choose the status display mode, follow the steps below Pressed VCR Display Panel Feature Light Symbols Front Panel Rear Panel Read and follow the steps below to play a tape Playing1Turn on the TV 2Insert a tape in the VCR Recording Press the VCR button on the remote control Press the TV button, then press the CHannel Up/Down Press the VCR button Start a recording seePress the Stop button to stop the recording One Touch Recording Press the Number 1 button to select Program Timer RecordingDaily Recording Menu Enter the recording’s stop time Enter the channel you want to record Press the STATUS/EXIT button. Program WAS COM Timer Recording cont’dTape Speeds Menu button Press the Number 1 button to select Program Checking or Cancelling Timer RecordingsSee page 58 for more hints Cable Box Cable Box Transmitters on VCR Find your Cable Box code Turn on the Cable Box Setting Up the Cable Box Controller cont’d TV Channels Cable Channels Setting Up the VCR Plus+ Programming SystemLocal TV Stations Call letters Press the Number 5 button to select VCR PLUS+ REF. MAP Examine the lists on Complete each step within 60 seconds of completing OncePrevious step. If you don’t, you may return to step Press the VCR PLUS+ /ENTER button on the remote con Timer Recording With the VCR Plus+ Programming System cont’d Rerecording Tape Duplication Repeat Playback Repeat Playback Time Search Time Search Example Index Search Skip Search Record End SearchDuring tape playback press the Skip Search button Real Time Counter Memory Real Time Counter Memory Forward and Reverse Searching SP/LP/SLP Special Effects PlaybackSuper High Speed Searching LP/SLP Playing a Tape at Double Speed Viewing a Slow Motion Picture Press the Play button to release the Still modeViewing a Picture in Slow to Fast Motion Play button or press the Slow button again Memory Rewind, Power Off Automatic Operation FeaturesAutomatic Playback Automatic Rewind, Eject, Off Automatic Tracking Adjustment Automatic Operation Features cont’dManual Tracking Understanding On-Screen Displays MTS Broadcast Stereo SystemSpecifically… Monitor To the right of your selection MTS Broadcast Stereo System cont’d Press the Number 3 button to select Audio OUT Hi-Fi Stereo Sound SystemAdditional hints are on Hi-Fi Stereo Sound System cont’d Helpful Hints Helpful Hints cont’d Cable Box/DSS Receiver Output Channel Channel 03 or Glossary Specifications Renewed Index Supplied Accessories