Index Search, Example | Magnavox VRX562AT99 specification

Index Search

This feature allows you to index the starting points of programs that you have recorded on a tape. Then, you can easily rewind or fast forward to that point.

Example:

If you are watching program number 4 and you want to fast for- ward to program number 7, skip three programs.

CURRENT PLAYBACK PROGRAM
Beginning of tape						End of tape
Pro. 1 Pro. 2			Pro.3 Pro. 4 Pro. 5 Pro. 6 Pro. 7
4	3	2	1	1	2	3
INDEX MARK
1

Press the VCR button.

2

Press the INDEX SEARCH button to bring up the index search display. There must be a tape in the VCR.

INDEX SEARCH

00

ENTER INDEX NUMBER

3

Within 10 seconds, use the Number buttons to enter the

number of programs that you want to skip. For example, to skip three programs, press Number buttons 0, 3. If you do not make an entry within 10 seconds, the VCR will exit Index Search mode.

4

Within 10 seconds, press the Fast Forward button or the

Rewind button to skip forward or backward. The VCR will fast forward or rewind to the beginning of the desired program, then begin playback. (The program numbers count down on- screen as the searching progresses. To remove the on-screen counter, press the INDEX SEARCH button once.)

Index Search 47

		1
	CBL/DSS		VCR	TV
	PAUSE	POWER		VCR PLUS+
4	/STILL			/ENTER
4	SLOW			F.ADV
	STATUS/EXIT			CLEAR
		MENU
	V			C
		VOL	CH
	V			C
3	1		2	3
3	4		5	6
	7		8	9
2	100		0	A.CH
	REC/OTR	INDEX	SKIP
	REC/OTR	SEARCH	SEARCH	VCR/TV
	SPEED	MEMORY
	EJECT	X2 PLAY	VAR.SLOW	TRACKING
	MUTE		TIME SEARCH REC END SEARCH

JOG & SHUTTLE

Helpful Hints

•Every time an index mark is skipped, the number of programs decreases by one.

•Up to 20 index marks may be searched.

•This function will not operate in recording mode.

•Press the STOP button to stop the search.

•An index mark will be made auto- matically when the REC(ord)/OTR button is pressed, or at the begin- ning of a Timer Recording or OTR.

•The index mark is not made if the PAUSE/STILL button is pressed and released during recording.

•The time gap between index marks should be greater than 1 minute for SP recording, 2 minutes for LP recording, and 3 minutes for SLP recording.

Image 47

Magnavox VRX562AT99 warranty Index Search, Example

Contents

VRX562AT For Customer Use Dear Philips Magnavox product owner Introduction FeaturesSafety Precautions Table of Contents Erasure Prevention Putting Batteries in the Remote ControlUsing the Remote Control VCR maintenance Disconnect the antenna or cable from your TV Hookups Without a Cable Box Plug in the TV and the VCR Hookups Without a Cable Box cont’d Watching TV With the VCR Off Timer RecordingsHookups With a Cable Box/DSS Receiver Recording/Viewing Any Channel Press the Play button to play the tape Hookups With a Cable Box/DSS Receiver cont’dRecording One Channel/Watching Another Playing a Tape Hookups With a Stereo TV 1Turn on the TV Turning on Your VCR Press the VCR button Press the Number 3 button to select Tuner SET UPChannel Memory Programming Channels Use the Number buttons to enter the channel number Channel Memory cont’dAdding/Deleting Channels Reviewing Programmed Channels Press the Number 2 button to select SET Manual Clock Setting the ClockManual Clock Setting Press the Number 4 button to select SET Clock Setting the Clock cont’d Bring up the main menu display Setting the Clock cont’dAutomatic Clock Setting Press the VCR button, then press the Menu button to Press the Number 4 button to select SET Time Zone Time Zone Daylight-Saving Time Selection Daylight-Saving Time Selection Press the Number 4 button to select Language Press the Number 2 button to select VCR SET UPLanguage Selection Language Selection 2Find your TV code Press and release the Mute button 2System code Find your Cable Box/Satellite Press the Mute button, then the PAUSE/STILL button If another remote control beepsRemote Locator Letting your VCR find your remote for you Rewind Button CBL/DSS ButtonVCR Button TV Button Remote Control Buttons cont’d Frame. ADVance Button Slow ButtonStop Button Menu Button Pressed Press the Number 2 button to select on Screen ModeOn-Screen Status Displays To choose the status display mode, follow the steps below VCR Display Panel Feature Light Symbols Front Panel Rear Panel 1Turn on the TV 2Insert a tape in the VCR PlayingRead and follow the steps below to play a tape Recording Press the VCR button on the remote control Press the Stop button to stop the recording Press the VCR button Start a recording seePress the TV button, then press the CHannel Up/Down One Touch Recording Recording Menu Timer RecordingPress the Number 1 button to select Program Daily Enter the recording’s stop time Enter the channel you want to record Tape Speeds Timer Recording cont’dPress the STATUS/EXIT button. Program WAS COM See page 58 for more hints Checking or Cancelling Timer RecordingsMenu button Press the Number 1 button to select Program Cable Box Cable Box Transmitters on VCR Find your Cable Box code Turn on the Cable Box Setting Up the Cable Box Controller cont’d Local TV Stations Call letters Setting Up the VCR Plus+ Programming SystemTV Channels Cable Channels Press the Number 5 button to select VCR PLUS+ REF. MAP Examine the lists on Press the VCR PLUS+ /ENTER button on the remote con OnceComplete each step within 60 seconds of completing Previous step. If you don’t, you may return to step Timer Recording With the VCR Plus+ Programming System cont’d Rerecording Tape Duplication Repeat Playback Repeat Playback Time Search Time Search Example Index Search During tape playback press the Skip Search button Record End SearchSkip Search Real Time Counter Memory Real Time Counter Memory Playing a Tape at Double Speed Special Effects PlaybackForward and Reverse Searching SP/LP/SLP Super High Speed Searching LP/SLP Play button or press the Slow button again Press the Play button to release the Still modeViewing a Slow Motion Picture Viewing a Picture in Slow to Fast Motion Automatic Rewind, Eject, Off Automatic Operation FeaturesMemory Rewind, Power Off Automatic Playback Manual Tracking Automatic Operation Features cont’dAutomatic Tracking Adjustment Monitor MTS Broadcast Stereo SystemUnderstanding On-Screen Displays Specifically… To the right of your selection MTS Broadcast Stereo System cont’d Additional hints are on Hi-Fi Stereo Sound SystemPress the Number 3 button to select Audio OUT Hi-Fi Stereo Sound System cont’d Helpful Hints Helpful Hints cont’d Cable Box/DSS Receiver Output Channel Channel 03 or Glossary Specifications Renewed Index Supplied Accessories