Setting Up the VCR Plus+ Programming System (cont’d) 41
2
Now, compare the channel numbers you have written in the VCR PLUS+ CH. and CABLE/TV CH. columns. You’ll notice that some stations have VCR Plus+ and Cable/TV channel numbers that are the same, and other stations have channel numbers that do not match. Where the channel numbers DO NOT match, you must tell the VCR the VCR Plus+ and Cable/TV channel numbers according to the following steps.
●Make each entry within 60 seconds of the previous entry.
3
Press the VCR button, then press the MENU button.
4
Press the Number 2 button to select VCR SET UP.
TO SELECT PUSH NO. SHOWN
1 REPEAT PLAY | OFF |
2ON SCREEN MODE
3AUDIO OUT
4LANGUAGE
5VCR PLUS+ REF. MAP
Examine the lists on
2 page 40.
| CBL/DSS | VCR | TV | |
| PAUSE | POWER | VCR PLUS+ | |
| /STILL |
|
| /ENTER |
|
|
|
| |
| SLOW |
|
| F.ADV |
| STATUS/EXIT |
| CLEAR | |
|
| MENU |
| |
3 | V |
|
| C |
| VOL | CH |
| |
V |
|
| C | |
1 |
| 2 | 3 | |
5 | 4 |
| 5 | 6 |
|
| |||
| 7 |
| 8 | 9 |
| 100 |
| 0 | A.CH |
| REC/OTR | INDEX | SKIP |
|
| SEARCH | SEARCH | VCR/TV | |
| SPEED | MEMORY |
| |
7
4
6
EJECT | X2 PLAY VAR.SLOW TRACKING |
TO END PUSH EXIT
5
Press the Number 5 button to select VCR PLUS+ REF. MAP.
VCR PLUS+ CROSS REF. MAP
VCR PLUS+ | CABLE/TV |
9898
9999
1 | – – – – | 1 |
2 |
| 2 |
TO SELECT CH PUSH CH UP/
DOWN THEN ENTER CH NO.
TO END PUSH EXIT
MUTE | TIME SEARCH REC END SEARCH |
JOG & SHUTTLE
6
Look at the lists you filled in on page 40. For stations whose
VCR Plus+ and Cable/TV channels do not match, press the CH(annel) Up/Down buttons until the arrow is beside the VCR Plus+ channel you need. Then, press the Number buttons to enter the corresponding Cable/TV channel from your list. (Enter a “0” before
VCR PLUS+ CROSS REF. MAP
VCR PLUS+ | CABLE/TV |
9898
9999
1– – – –
22
TO SELECT CH PUSH CH UP/
DOWN THEN ENTER CH NO.
TO END PUSH EXIT
7
Press the STATUS/EXIT button to exit.
Helpful Hints
•To correct a Cable/TV channel num- ber, repeat the steps on this page.
•To clear a Cable/TV channel num- ber, repeat steps
Up/Down buttons to select it. Then press the CLEAR button. Press the STATUS/EXIT button to exit.
•Always enter a “0” before single- digit channels.
•To select line input for the Cable/TV channel, press 0,0. AUX will appear
•When you receive the VCR from the factory, all the VCR Plus+ channel numbers and Cable/TV channel numbers are the same.
