4. USE
4.2 Using the timer
The lawn should not be cut too often to obtain the best mowing result. Use the timer function (see 6.3 Timer on page 44.) to avoid a downtrodden lawn. When setting the timer, calculate that the robotic lawnmower mows about 45 m2 per hour and day (about 30 m2 for Automower® 305).
Example
If the working area is 360 m2 the robotic lawnmower must operate for about 8 hours per day (about 12 hours for the Automower® 305). The times are approximate and depend for instance on grass quality, blade sharpness and battery age.
IMPORTANT INFORMATION
Use the timer to avoid mowing when there are usually children, pets and anything else that could be damaged by the rotating blades on the lawn.
The factory setting for the timer is
If the size of the working area allows it, the quality of the grass can be further improved if it is cut every other day instead of a few hours every day. In addition, the grass benefits from resting completely during at least a
Standby
The robotic lawnmower has an inbuilt standby period of about 6 hours a day (8 hours for the Automower® 305). The standby period provides a good opportunity, for example, to water or play games on the lawn.
Example 1
The times used in this example are applicable to the Automower®305 but the principle is the same for the Automower® 308.
Work period 1: 07:00 - 23:00
Work days: All days
The factory setting ensures that the robotic lawnmower begins cutting the lawn at 07.00. The mower is parked in the charging station from
22.00and rests until it starts cutting again at
|
| 24 h |
|
B |
|
| A |
| Standby | Mowing | Charging |
Operation
305
Operation | A = Max 16 h | |
| ||
Charging/Standby | B = Min 8 h | |
| ||
308 | A | |
Operation | ||
Charging/Standby | = Max 18 h | |
B = Min 6 h | ||
|
36 - English