6. MENU FUNCTIONS
Test settings
In the Test settings menu, it is possible to test settings for Remote start 1 and that the selected guide width works for the garden in question.
Test OUT
The Test OUT function is used to test exit settings and to calculate the distance from the charging station to a remote area.
To test the settings in Remote start 1:
Dock the robotic lawnmower in the charging station and select Test OUT. The mower will then leave the charging station straight away along the guide wire and begin mowing after the designated distance.
If there is a passage that the mower cannot get through, the settings in Guide width
The figure here shows how the robotic lawnmower travels through a passage when Guide width is set to Medium and not to Wide.
How to measure the distance from the charging station to a remote area:
Enter a distance which beyond any doubt exceeds the real figure. The maximum distance that can be entered is 500 metres. Dock the robotic lawnmower in the charging station and select Test OUT. The robotic lawnmower will immediately leave the charging station. The distance, stated in metres, will be shown in the mower display as the mower operates. Stop the robotic lawnmower at the required position and note the distance. Enter the displayed number of metres in the Distance field for the working area in question.
If Remote start 2 has been activated, i.e. if another option other than Never has been selected for Proportion, these settings must also be tested. Remote start 2 test is performed in the same way as for Remote start 1.
Corridor width
Remote start 1 Remote start 2
Test settings
Drive past wire
Test IN
Test OUT
Test IN
Test OUT
Remote start 1
Remote start 2
48 - English