3. INSTALLATION
3.5 Connecting the boundary wire
Connect the boundary wire to the charging station:
IMPORTANT INFORMATION
The boundary wire must not be crossed when connecting it to the charging station. The right hand wire end must be connected to the right hand pin on the charging station and the left hand wire end to the left pin.
1.Place the wire ends in the connector:
•Open the connector.
•Place the wire in the connector grip.
2.Press the connectors together using a pair of pliers. Press until you hear a click.
3.Cut off any excess boundary wire 1 or 2 centimetres above each connector.
4.Press the connector onto the metal pins, marked
with an A, on the charging station.
IMPORTANT INFORMATION |
|
The right hand connector must be connected |
|
to the right hand metal pin on the charging |
|
station and the left hand wire end to the left |
|
connector. |
28 - English