9. TROUBLESHOOTING
9.3 Symptoms
If your Automower® does not work as expected, follow the troubleshooting guide below.
There is a FAQ (Frequently Asked Questions) on www.automower.com which provides more detailed answers to a number of standard questions. It you still cannot find the reason for the fault, contact the local dealer.
Symptoms | Cause | Action | |
|
|
| |
|
|
| |
The robotic lawn | The boundary wire is not laid in a long | Check that the charging station has | |
mower has difficulty | straight line that is far enough out | been installed according to the | |
docking with the | from the charging station. | instructions in 3.2 Installation of the | |
charging station |
| charging station on page 17. | |
|
|
| |
| The guide wire is not inserted in the | It is absolutely critical for operation | |
| slot at the bottom of the charging | that the guide wire is perfectly straight | |
| station. | and is in the correct position under | |
|
| the charging station. Therefore make | |
|
| sure that the guide wire is always in | |
|
| its slot in the charging station. See | |
|
| 3.6 Installation of the guide wire. | |
|
|
| |
| The charging station is on a slope | Place the charging station on a | |
|
| surface that is entirely level. See | |
|
| 3.2 Installation of the charging station | |
|
| on page 17. | |
|
|
| |
Uneven mowing | The robotic lawnmower works too few | Increase the mowing time. See | |
results | hours per day. | 6.3 Timer on page44. | |
|
|
| |
| The proportion setting is incorrect in | Check that the correct Proportion | |
| relation to the layout of the working | value is selected. See 6.4 Installation | |
| area | on page 45. | |
|
|
| |
| The shape of the working area | Also use Remote start 2 to steer the | |
| requires the use of both Remote start | robotic lawnmower to a remote area. | |
| 1 and Remote start 2 for the robotic | See 6.4 Installation on page 45. | |
| lawnmower to find its way to all |
| |
| remote areas. |
| |
|
|
| |
| Working area too large. | Try limiting the working area or | |
|
| extending the working time. See | |
|
| 6.3 Timer on page 44. | |
|
|
| |
| Dull blades. | Replace all the blades and screws so | |
|
| that the rotating parts are balanced. | |
|
| See 8.7 Blades on page 60. | |
|
|
| |
| Long grass in relation to the set | Increase the cutting height and then | |
| cutting height. | successively lower. | |
|
|
| |
| Accumulation of grass by the blade | Check that the blade disc rotates | |
| disc or around the motor shaft. | freely and easily. If not, screw off the | |
|
| blade disc and remove grass and | |
|
| foreign objects. See 8.4 Cleaning. | |
|
|
| |
The robotic | The robotic lawnmower clock needs | Set the clock. See 6.6 Settings on | |
lawnmower runs at | to be set. | page 51. | |
the wrong time |
|
| |
The start and stop times for mowing | Reset the start time and stop time | ||
| |||
| are incorrect. | settings for mowing. See 6.3 Timer | |
|
| on page 44. | |
|
|
|
English - 67