Husqvarna 308 manual Transport, Introduction And Safety, Important Information

1.INTRODUCTION AND SAFETY

•The robotic lawnmower must never be used at the same time as a sprinkler. In this case use the timer function (see 6.3 Timer on page 44) so the robotic lawnmower and sprinkler never run simultaneously.

•Full compatibility cannot be guaranteed between the robotic lawnmower and other types of wireless systems such as remote controls, radio transmitters, hearing loops, buried electric animal fencing or similar.

•Metal objects in the ground (e.g. reinforced concrete or anti-mole nets) can result in a stoppage. The metal objects can cause interference with the loop signal which then can lead to a stoppage.

Transport

The original packaging should be used when transporting the robotic lawnmower over long distances.

To safely move from or within the working area:

1. Press the STOP button to stop the robotic lawnmower. If security is set to the medium or high level (see 6.5 Security on page 49), the PIN code has to be entered. The PIN code contains four digits and is selected when you start the robotic lawnmower for the first time. See 3.8 First start-up and calibration on page33.

2. Set the main switch in position 0.

3.Carry the robotic lawnmower by the handle

found at the rear under the robotic lawnmower. Carry the robotic lawnmower with the blade disc away from the body.

IMPORTANT INFORMATION

Do not lift the robotic lawnmower when it is parked in the charging station. This may damage the charging station and/or the robotic lawnmower. Open the cover and instead first pull the robotic lawnmower out of the charging station before lifting it.

3012-963

3012-1023

3012-1052

English - 9