6. MENU FUNCTIONS
6.4 Installation |
|
| |
The following operating settings are available via this |
|
| |
Timer |
| ||
selection in the main menu. |
| ||
|
| ||
• | Guide width | Installation |
|
| to select the distance from the guide wire the |
| |
|
|
| |
| mower is allowed to travel when it follows this to |
|
|
| and from the charging station. | Security |
|
• | Remote start 1 |
|
|
| to control the robotic lawnmower so that it can | Settings |
|
| easier reach remote parts of the garden. |
|
|
•Remote start 2
to control the robotic lawnmower so that it can easier reach remote parts of the garden.
•Test settings
to check the above settings.
•Drive past wire
to set the distance over the boundary wire that the mower should drive.
See 7. Garden examples for examples of garden settings.
Guide width
Remote start 1
Remote start 2
Test settings
Drive past wire
Guide width
The guide width is a measure of how far from the guide wire the mower is allowed to travel when it follows this to and from the charging station. The area beside the wire which the mower then uses is called the Corridor.
The robotic lawnmower has a default setting for medium wide corridors. To further reduce the risk of tracks forming, it is recommended to select a wide corridor in working areas where it is possible to do so.
IMPORTANT INFORMATION
Always use as wide a guide width as possible. The Narrow setting must only be used when none of the other settings can be used in the working area in question.
Guide width
Remote start 1
Remote start 2
Test settings Drive past wire
Narrow
Medium
Wide
English - 45