6. MENU FUNCTIONS
The following five options can be selected;
-Never (0%)
-Rarely (approx. 20%)
-Medium (approx. 50%)
-Often (approx. 80%)
-Always (100%)
Select the percentage that corresponds to the size of the remote area relative to the total working area. If the remote area is for instance less than half of the total working area, then Rarely must be selected. If the remote area is for instance half of the total working area, Medium must be selected. Compare with the examples in 7. Garden examples on page 53.
The default setting is Rarely.
•Distance
Enter the distance in metres along the guide wire from the charging station to the remote area where the mower begins mowing.
Tips! Use the Test OUT function to determine how far it is to the remote area. The distance, stated in metres, will be shown in the mower display.
Remote start 2
If the working area contains two remote areas, the guide wire should be installed so that it reaches both areas. Remote start 1 and Remote start 2 can then be combined to steer the robotic lawnmower to each area.
The settings for Proportion and Distance are carried out in the same way as for Remote start 1.
The default setting is Never.
Take into account that the total figure for Proportion |
|
cannot exceed 100%. For example, if Often is |
|
selected for Remote start 1, then only Never or |
|
Rarely can be selected for Remote start 2. |
The guide width is the same for Remote start 1 and Remote start 2. In this way, it is the narrowest passage along the guide wire that limits the maximum guide width.
English - 47
