Husqvarna 308 manual Troubleshooting, Message, Cause, Action, English

Models: 308

1 78
Download 78 pages 38.21 Kb
Page 64
Image 64
64 - English

9. TROUBLESHOOTING

Message

Cause

Action

 

 

 

 

 

 

Trapped

The robotic lawnmower has got

Free the robotic lawnmower and

 

caught in something.

rectify the reason for it becoming

 

 

trapped.

 

 

 

 

The robotic lawnmower is stuck

Check if there are any obstacles

 

behind a number of obstacles.

which make it hard for the robotic

 

 

lawnmower to move on from this

 

 

location.

 

 

 

Outside working area

The boundary wire connections to the

Check that the boundary wire is

 

charging station are crossed.

connected correctly.

 

 

 

 

The boundary wire is too close to the

Check that the boundary wire has

 

edge of the working area.

been laid according to the instructions

 

 

in chapter 3. Installation.

 

 

 

 

The working area slopes too much.

Check that the boundary wire has

 

 

been laid according to the instructions

 

 

in chapter 3. Installation.

 

 

 

 

The boundary wire is laid in the wrong

Check that the boundary wire has

 

direction around an island.

been laid according to the instructions

 

 

in chapter 3. Installation.

 

 

 

 

Disturbances from metal objects

Try moving the boundary wire.

 

(fences, reinforcement steel) or

 

 

buried cables close by.

 

 

 

 

 

The robotic lawnmower finds it hard

Place the robotic lawnmower in the

 

to distinguish the signal from another

charging station and generate a new

 

robotic lawnmower installation close

loop signal via Security -> New loop

 

by.

signal.

 

 

 

Low battery

The robotic lawnmower cannot find

Check that the charging station and

 

the charging station.

the guide wire are installed in

 

 

accordance with the instructions, see

 

 

3. Installation on page 16.

 

 

 

 

The guide wire is broken or not

Check that the indicator lamp in the

 

connected.

charging station flashes yellow. See

 

 

the solution in 9.2 Indicator lamp in

 

 

the charging station on page 66.

 

 

 

 

The battery is spent.

Replace the battery. See 8.8 Battery

 

 

on page 61.

 

 

 

 

The charging station's antenna is

Check if the indicator lamp in the

 

defective.

charging station flashes red. See the

 

 

solution in 9.2 Indicator lamp in the

 

 

charging station on page 66.

 

 

 

Wrong PIN

Wrong PIN code has been entered.

Enter the correct PIN code. Contact

 

Five attempts are permitted, and the

the local dealer if you forget the PIN

 

keypad is then blocked for five

code.

 

minutes.

 

 

 

 

64 - English

Page 64
Image 64
Husqvarna 308 manual Troubleshooting, Message, Cause, Action, English