3. INSTALLATION
Installation and connecting the charging station
1.Position the charging station in a suitable spot.
2.Connect the low voltage cable to the charging station.
3.Connect the transformer’s power cable to a
230 V wall socket. If the wall socket is outdoors, it is important that the transformer is protected from direct sunlight.
4.Attach the charging station to the ground using the supplied screws. Ensure the screws are screwed all the way down in the countersink.
IMPORTANT INFORMATION
It is not permitted to make new holes in the base plate Only the existing holes may be used to secure the base plate to the ground.
IMPORTANT INFORMATION
Do not tread or walk on the charging station's base plate.
3.3 Charging the battery
As soon as the charging station is connected, it is possible to charge the robotic lawnmower. Set the main switch to position 1.
Place the robotic lawnmower in the charging station to charge the battery while the boundary and guide wires are being laid.
If the battery is flat, it takes around 80 to 100 minutes to fully charge it.
IMPORTANT INFORMATION
The Automower® cannot be used before the installation is complete.
English - 21 |
