Inglis Home Appliances Washer manual Installationrequirements

INSTALLATIONREQUIREMENTS

Gather the required tools and parts before starting installation. The parts supplied are in the washer basket.

Tools needed:

•Pliers that open to 1%6" (3.95 cm)

•Flashlight (optional)

•Adjustable or open end wrench %6" (14 mm)

•Level

•Wood block

•Utility knife

•Measuring tape

•T-20 TORX®t screwdriver

•Phillips screwdriver

Parts supplied:

BC

			E			F
A. U-shaped	hose form	D. Inlet hose washers/screens				(2)
B. Water inlet hoses (2)		E. Spoke	with	4 clear	plastic	plugs
C. Inlet hose	washers (2)	F. Black	plastic	plugs	(2)

1-®TORX is a registered trademark of Textron Innovations Inc.

Alternate Parts

Your installation may require additional parts. For ordering information, please refer to the "Assistance or Service" section of this manual.

If You Have:				You Will Need to Buy:
Laundry	tub		or	Sump pump		system			(if not already
standpipe		taller		available)
than 72" (183 cm)
1" (2.5 cm)				2" (5 cm) diameter				to	1" (2.5 cm)
diameter				diameter	standpipe			adapter,
standpipe				Part Number		3363920
Overhead		sewer		Standard	20 gal. (76 L) 39" (99 cm) tall
				drain tub or utility sink, sump pump and
				connectors		(available			from local
				plumbing	suppliers)
Lint clogged			drain	Drain protector,			Part		No. 367031
Water faucets				2 longer	water		fill hoses:
beyond	reach of			6 ft (1.8 m) Part Number						76314,
fill hoses				10 ft (3.0 m) Part Number						350008
Must also		order:		British to	universal			hose adapter,
				Part No. 3357451
Installing		new		British to universal hose adapter,
water inlet hoses				Part No.	3357451

Pedestal

You may order a pedestal separately for this washer. This pedestal will add about 12" (30.48 cm) to the height of your unit for a total height of approximately 45" (114.3 cm).

Optional pedestal

To order, call the dealer from whom you purchased your washer or refer to the "Assistance or Service" section of this manual. Ask for Model Number LAB0050PQ.

Stack Kit

Are you planning to stack your washer and dryer? To do so you will need to purchase a Stack Kit.

To order, call the dealer from whom you purchased your washer or refer to the "Assistance or Service" section of this manual. Ask for Part Number 8182452.