Insignia ICE D-20 EC506 manual Configuring WAN, I. Configuring the parameters of WAN connection

User Guide
ICE D-20 Wireless Broadband Gateway	Table of Contents

z

z

z

z

Bridges: The physical address of the remote peer bridge. D-20 supports P-to-P bridge mode. One D-20 can connect with four remote peer bridges.

Peer MAC Address: The physical address list of the remote peer bridges. Up to four physical addresses can be filled in.

Link Status: Two statuses are available, up and down. up means bridging is successful and down means bridging is unsuccessful.

MAC Restrict Mode: Three options are listed in Table 3-3.By default, it is Disabled.

Table 3-3MAC restrict mode parameter description

Parameter	Description
Disabled	MAC address filter function is disabled.
	The wireless terminals corresponding to the MAC addresses
Allow	in the MAC addresses list are allowed to access D-20
	through WLAN.
Deny	The wireless terminals corresponding to the MAC addresses
	in the MAC addresses list are forbidden to access D-20
	through WLAN.

z

z

MAC Addresses: MAC addresses list. D-20 controls the access to the clients whose addresses are listed in the MAC address list. Up to 16 MAC addresses can be saved in the list.

Authenticated Stations: The information of wireless terminals that logs in to D-20 through authentication.

3.3.5Configuring WAN

I.Configuring the parameters of WAN connection

The steps of entering WAN configuration page are shown as follows.

1)Click Advanced in the operation navigation area.

2)Click WAN in the unfolded navigation tree to display the parameter configuration page of WAN. In this page, you can set the PPP parameters and parameters for connecting the CDMA network. Click Apply to save your settings. Figure 3-10shows the configuration page.

Huawei Technologies Proprietary

3-10