Settings & Adjustments
Note:
The TV Type default setting is NTSC.
vVideo Output Setting
Video output selection enables you to choose the type of video output suitable for your DVD system. The default setting is
Select
YPBPR
Select YPBPR if you have connected the Pr Pb Y output to your TV using Pr Pb Y jack.
Note:
=You can select TV Display Setting & TV Type Setting only in stop mode.
vAngle Mark Setting
If the disc contains sequences recorded from different camera angles, this allows you to view the picture from different angles. The selections of angle are dependent on the disc format.
The default setting is ON.
ON: : appears on the TV screen.
OFF: : does not appear.
vOSD Language Setting
Select the language for
ENGLISH
SPANISH
vScreen Saver Setting
If set to ON, when you leave the system in stop or no disc mode for more than five min- utes, the screen saver will be activated.
The default setting is ON.
vProgressive Setting
Select the progressive menu then on screen display for menu as below.
The default setting is OFF.
Notes:
=You can select PROGRESSIVE setting only within the YPbPr mode.
=When PROGRESSIVE is ON, you can’t select the VIDEO OUTPUT setting.
English
21