Settings & Adjustments
English | Setting the Speaker Setup |
|
vCenter Delay Setting
If the listening position is closer to the centre speaker than the front speakers, you can set the center delay time to improve the surround sound effect.
Options: 5ms, 4ms, 3ms, 2ms, 1ms, or OFF .
The default setting is OFF.
vRear Delay Setting
If the listening position is closer to the rear surround speakers than the front speakers, you can set the rear delay time to improve the surround sound effect.
Options: 15ms, 12ms, 9ms, 6ms, 3ms or OFF.
The default setting is OFF.
vTest Tone Setting (disc mode only)
If set to ON, the system will test the speaker settings. The test signal is generated through the left, center, right, and surround speakers.
The default setting is OFF.
Setting the Audio Setup
vD.R.C Setting
Select the D.R.C range compression to fit the individual listening situation of the audience.
The default setting is OFF.
The variable range is from FULL, 7/8~1/8 or OFF.
=FULL: Audio with fully compressed D.R.C range.
=7/8~1/8: Audio with partially compressed D.R.C range.
=OFF: Audio with uncompressed D.R.C range.
Note:
=In many listening situations, it is objectionable to allow the sound to become very loud, and thus the loudest sounds must be compressed downwards in level. Likewise, the very quiet sounds would be inaudible and must be brought upwards in level to be heard. Dolby Digital satisfies these needs with D.R.C range compression.
22
