Insignia 42" 1080p LED TV
Using composite video (good)To connect a cable or satellite box using composite video:1Make sure that your TV’s power cord is unplugged, and all connected equipment is turned off.
2Connect the incoming cable from the cable wall jack to the
3 Connect an A/V cable (not provided) to the |
COMPONENT/AV Y/VIDEO jack and L and R |
audio jacks on the back of your TV and to the |
1Make sure that your TV’s power cord is unplugged, and all connected equipment is turned off.
2Connect the incoming cable from the cable wall jack to the
3Connect a coaxial cable (not provided) to the ANT/CABLE jack on the back of your TV and to the coaxial out jack on the cable or satellite box.
composite video and audio out jacks on the |
cable or satellite box. |
Note
•The L and R audio jacks provide the audio connection for a component video device connected to the COMPONENT/AV Y/VIDEO, PB, and PR video jacks or for a composite video device connected to the COMPONENT/AV Y/VIDEO jack.
•When you connect the audio using the
L and R audio jacks, the audio output is analog.
Cables are often
Note: The yellow video connector on the AV cable connects to the green COMPONENT/AV Y/VIDEO jack.
Cable or satellite box
Y / VIDEO | PB | PR | L | R |
Back of TV
Cable or satellite box
Coaxial cable
Y / VIDEO PB | PR | L | R |
| cableA/V | ||||
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Back of TV | ||
|
|
|
|
|
|
| |||
|
|
|
|
| |||||
|
|
|
|
|
|
| |||
4Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5Go through the Setup Wizard on page 24.
4Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5Go through the Setup Wizard on page 24.
Notes
•Use a coaxial cable to eliminate interference and noise from radio waves.
•Do not bundle the coaxial cable with the power cord or other cables.
www.insigniaproducts.com | 15 |