NS-42E470A13 Insignia 42" 1080p LED TV

Programming channel lock

 

 

6 Press the button in the new mode that should

Channel control can be locked so that the Insignia

perform the function (for example, Play). The

LED blinks twice.

remote controls a single device’s channel-changing

7 Repeat Steps 1-6 to move additional buttons.

functions, regardless of operating mode. This is

often enabled by users who watch all broadcast TV

To restore all buttonmoved data in a specific

through one device, such as a cable set-top box.

mode:

The affected buttons are 1 through 0, CH , CH ,

1 Press and hold SET until the LED blinks twice,

and RECALL.

 

 

 

 

To lock all channel controls to one device:

then release.

2 Press 9 9 4. The LED blinks twice.

1 Press the mode button for the device that you

3 Press the device button you want to remove all

want to use for changing channels, such as STB

buttonmoved data from twice. The LED blinks

for your cable set top box.

 

 

 

 

twice.

2 Press and hold SET until the mode LED blinks

4 Repeat for each device you want to restore.

twice, then release.

 

 

 

 

 

 

 

3 Enter 9 7 3.The mode LED blinks twice.

To restore original button function:

4 Press CH

once. The mode LED blinks twice.

1 Press the device button for which you want to

Now, regardless of what mode you select, the

remove the buttonmoved data from a specific

button.

channel buttons will only change channels on

2 Press and hold SET until the LED blinks twice,

the assigned device.

 

 

To unlock channel locks:

 

 

then release.

 

 

3 Enter 9 9 4. The LED blinks twice.

1 Press and hold SET until the mode LED blinks

4 Press the button you want to remove the

twice, then release.

 

 

 

 

buttonmoved data from twice. The LED blinks

2 Enter 9 7 3. The mode LED blinks twice.

twice.

3 Press CH

once. The mode LED blinks four

5 Repeat Steps 1-4 for additional buttons you

times.

 

 

 

 

want to remove.

Now the channel functions will correlate to the

Programming macros

active mode (for example, press CH

 

in TV

Your Insignia universal remote control includes the

mode and the TV changes channel accordingly).

Using buttonmover

 

 

 

 

ability to program any button (other than the SET

 

 

 

 

button) with a macro function. Each one can be set

 

 

 

 

 

 

 

Your Insignia universal remote control includes a

up to perform a pre-programmed set of sequential

buttonmover feature that lets you copy buttons

button presses with the press of a single button. A

from one mode (such as source mode) to another

macro can be used to control a home theater

mode (such as destination mode) or to a different

operation, to set a favorite channel, or for other

button in the same mode.

 

 

functions you would like to control with one button

 

 

 

 

 

 

 

press. Each macro button can hold up to 15 button

 

Note

 

 

 

 

presses, total.

 

 

Do not use any of the Device Buttons,

 

(power),

 

 

 

 

 

 

 

 

 

 

 

RECORD, or SET as a source or destination button.

 

Note

 

 

 

 

 

 

 

 

 

Programming a new macro over an existing one

To move buttons in the same device mode:

 

 

erases the original macro.

1 Press the device button (TV, DVD, STB, or AUX).

 

 

 

To program a mode-independent macro:

2 Press and hold SET until the LED blinks twice,

1 Press and hold SET until the red LED blinks

 

then release.

 

 

 

 

 

twice, then release.

3 Press 9 9 4. The LED blinks twice.

 

 

 

 

2 Press 9 9 5. The LED blinks twice.

4 Press the button you want to move.

 

 

 

 

3 Press the button you want to assign to a macro.

5 Press the new button that should perform the

4 Enter the series of commands you want the

 

function. The LED blinks twice.

 

 

 

 

 

macro to execute (up to 15 commands).

6 Repeat Steps 1-5 to move additional buttons.

5 Press and hold SET until the red LED blinks

 

 

 

 

 

 

 

To move buttons to a different device mode:

twice, then release.

Now, when you press the preset macro button,

1 Press and hold SET until the LED blinks twice,

 

then release.

 

 

the remote sends the series of commands you

2 Press 9 9 4. The LED blinks twice.

 

 

have entered, regardless of what mode you are

 

 

in. For example, you could program a macro

3 Press the device button that contains the

button to turn on both your TV and cable box

function you want to move (for example, DVD).

and select a particular channel.

4 Press the button you want to move (such as

 

 

 

 

Note

Play).

 

 

 

 

 

 

 

 

 

 

 

 

To clear the macro, repeat Steps 1-5, but do not enter

5 Press the device button that you want to movea series of commands at Step 4. the function to (such as TV).

56

www.insigniaproducts.com