NS-42E470A13 Insignia 42" 1080p LED TV

Using composite video (good)

To connect a DVD or Blu-ray player using composite video:

1Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.

2Connect an AV cable (not provided) to the COMPONENT/AV Y/Video jack and

L and R audio jacks on the back of your TV and to the AV OUT jacks on the DVD or Blu-ray player.

Note

•The L and R audio jacks provide the audio connection for a component video device connected to the COMPONENT/AV Y/VIDEO, PB, and PR video jacks or for a composite video device connected to the COMPONENT/AV Y/VIDEO jack.

•When you connect the audio using the

L and R audio jacks, the audio output is analog.

Cables are often color-coded to match color-coded jacks.

Note: The yellow video connector on the AV cable connects to the green COMPONENT/AV Y/VIDEO jack.

DVD or Blu-ray player

Y / VIDEO PBPRL R

Back of TV

AV cable

3Plug your TV’s power cord into a power outlet, then turn on your TV.

4Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the documentation that came with the player.

5Press INPUT to open the Input Source list.

6Press S or T to select Component/AV, then press ENTER or OK/ENTER.

Notes

You can also press VIDEO to select the DVD or Blu-ray player.

Connecting a VCR

To connect a VCR:

1Make sure that your TV’s power cord is unplugged and the VCR is turned off.

2Connect an AV cable (not provided) to the COMPONENT/AV Y/VIDEO and L and R audio jacks on the back of your TV and to the AV OUT jacks on the VCR.

Note

•The L and R audio jacks provide the audio connection for a component video device connected to the COMPONENT/AV Y/VIDEO, PB, and PR video jacks or for a composite video device connected to the COMPONENT/AV Y/VIDEO jack.

•When you connect the audio using the L and R audio jacks, the audio output is analog.

Cables are often color-coded to match color-coded jacks.

Note: The yellow video connector on the AV cable connects to the green COMPONENT/AV Y/VIDEO jack.

VCR

Y / VIDEO PBPRL R

Back of TV

AV cable

3Plug your TV’s power cord into a power outlet, then turn on your TV and the VCR.

4Press INPUT to open the Input Source list.

5Press S or T to select Component/AV, then press ENTER or OK/ENTER.

Note

You can also press VIDEO to select the VCR.

6Insert a videotape in the VCR, then press PLAY on the VCR.

18

www.insigniaproducts.com