Insignia NS-42E470A13 SET, SET, SET, DVD, STB, AUX, SET, SET, DVD, STB, AUX, SET, VOL, VOL+, VOL–, Mute, VOL+, Changing the volume lock, To lock the volume control:

Insignia 42" 1080p LED TV

• For optimum learning, avoid high levels of			2	Press and hold SET until the LED blinks twice,
ambient light such as natural sunlight or				then release.
energy-efficient fluorescent lights.			3	Enter 9 7 6. The LED blinks twice.
			3	Enter 9 7 6. The LED blinks twice.
	Note		4	Press the button containing the learned
		Have your original remote controls handy before		function to be deleted, twice. The LED blinks
		programming learning.		twice and programming ends.
Programming a learned button			Deleting all learned buttons in a specific mode

To program a learned button:

1Place your Insignia remote control head-to-head (about 2" apart) from your original remote control (the one that came with the device).

2Locate the button on your original remote control that you want the Insignia remote control to learn. Press the mode button you want to learn functions on.

3Press and hold SET until the LED blinks twice, then release.

4Enter 9 7 5. The LED blinks twice.

Note

If more than 10 seconds pass between button presses, the remote exits programming.

If the LED displays one long flash instead, replace the batteries. If the remote control continues to display one long flash, the remote control cannot learn a new button.

5Press the button on the Insignia TV remote you want to program. The feedback LED stays lit for three seconds, indicating that the remote is ready to learn.

6On the original remote, press and hold the button to be learned. Continue holding the button on the original remote until the Insignia’s LED blinks twice.

Note

If the red LED displays one long blink, a learning error has occurred. Try repeating this step again until a successful capture occurs. If the function is still not captured, press and hold SET to exit programming and review the Precautions” above. After reviewing, start programming again at Step 1.

7Repeat Steps 4 and 5 to program another button. Once you have completed programming all the buttons you want, press and hold SET until the LED blinks twice to save all data learned.

Deleting a single learning button

This process returns the button to its original programming for the mode you select. You can also delete learned programming by teaching a different function to the button (see “Programming a Learned Button” above).

Note

If more than 10 seconds pass between button presses, the remote exits programming.

If the LED displays one long flash instead, replace the batteries. If the remote control continues to display one long flash, the remote control cannot learn a new button.

To delete a single learned button:

1Press the mode button that you want to remove the learned button from.

Note

If more than 10 seconds pass between button presses, the remote exits programming.

If the LED displays one long flash instead, replace the batteries. If the remote control continues to display one long flash, the remote control cannot learn a new button.

To delete all learned buttons in a specific mode:

1Press and hold SET until the LED blinks twice, then release.

2Press 9 7 6. The LED blinks twice.

3Press a mode button twice (for example, TV, DVD, STB, or AUX) to clear all the learned buttons for that mode. The LED blinks twice and programming ends.

Changing the volume lock

Volume Lock sets the volume and mute buttons to the device you select, regardless of what mode you are in. For example, if you lock the volume to your DVD player and then go to TV mode, when you press the volume button on your Insignia remote, the volume will change on the DVD player and not on your TV.

To lock the volume control:

1Press and hold SET until the red LED blinks twice, then release.

2Enter 9 9 3, the LED blinks twice.

3Press the mode button for the device you want to control (for example, TV).

4The LED blinks twice. Now when you press VOL+, VOL–, or Mute, the selected device controls the volume regardless of the current mode.

To unlock all volume control:

1Press and hold SET until the red LED blinks twice, then release.

2Enter 9 9 3, the LED blinks twice.

3Press VOL+. The LED blinks four times. Volume is independently controlled for all programmed devices.

To unlock a single device’s volume control:

1Press the device mode button (TV, DVD, STB, or AUX).

2Press and hold SET until the red LED blinks twice, then release.

3Enter 9 9 3. The LED blinks twice.

4Press VOL-. The red LED blinks four times. Volume is independently controlled for the selected devices.