Insignia 42" 1080p LED TV
Installing remote control batteries
Remote control model NS-RC03A-13
To install remote control batteries:
1While pressing the release latch on the back of the remote control, lift the battery compartment cover off the remote control.
Remote control models NS-RC05A-11 and NS-RC01G-09
To install the remote control batteries:
1While pressing the release button on the battery compartment cover on the back of the remote, lift the cover off the remote.
2Insert two AA batteries into the battery compartment. Make sure that the + and – symbols on the batteries align with the + and – symbols in the battery compartment.
3Replace the cover.
2Insert two AAA batteries into the battery compartment. Make sure that you match the + and – symbols on the batteries with the + and – symbols in the battery compartment.
3Replace the battery compartment cover.
Cautions
•Batteries should not be exposed to excessive heat, such as sunshine, heat registers, or fire.
•Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals touch your skin, wash immediately.
•Make sure that batteries are disposed of correctly. Do not burn or incinerate.
Notes
•Do not mix batteries of different types.
•Do not mix old and new batteries.
•Remove batteries when the charge is depleted.
•If the remote control is not going to be used for an extended period of time, remove the batteries.
Aiming the remote control
To aim the remote control:
•Point the remote control towards the remote sensor on the front of your TV.
www.insigniaproducts.com | 23 |