Insignia NS-7UTCTV 7" Under-the-Cabinet DVD/LCD TV

Connecting to the AC power adapter

Your DVD/TV is powered by an AC switching power adapter (provided).

To AC power outlet

To connect the AC power adapter:

1Connect the round plug of the AC power adapter to the DC 12V IN jack on the back of your DVD/TV.

2Plug the twin-blade end of the AC power adapter cord into a standard power outlet.

Note

When you will not be using your DVD/TV for an extended period of time, turn it off and unplug the power supply.

To fix the AC power adapter to the top of your DVD/TV:

•Using the two-sided tape (provided), stick the AC power adapter to the top of your DVD/TV.

OR

Or, screw the two retention wires (provided) to the top of your DVD/TV (1), then wrap the wires around the power cables to hold the AC power adapter to the top of your DVD/TV (2).

Installing your DVD/TV

After all the connections are made, you are ready to install your DVD/TV under a cabinet. We suggest that you install your DVD/TV under a wall cabinet (such as a kitchen cabinet), either with or without the spacer.

Note

The dimensions of your DVD/TV are 3.11” (high) × 14.76” (wide) × 10.9” (deep) (7.9 × 37.49 × 27.69 cm). There should be at least 1.38” clearance between the back of your DVD/TV and the wall.

AC power cord

 

Cord clamp

 

 

 

To install your DVD/TV:

1Mark the position of the four mounting holes by using the supplied paper template, then drill four 6.8 mm holes at those locations.

2Attach the mounting plate to your DVD/TV with the screws provided. The beveled edge of the mounting plate must go towards the front of your DVD/TV.

Beveled edge toward front

3Using the four mounting screws and spacers provided, mount your DVD/TV under the cabinet.

If the cabinet door overhangs the shelf and obstructs the front of your DVD/TV, adjust the installation or shelf height for clearance.

Warnings

•Your DVD/TV is heavy. Be careful when doing the installation, or you could damage your DVD/TV or injure yourself.

•To reduce the risk of fire, do not place any heating or cooking appliances under your DVD/ TV, especially while the screen is open for viewing.

Notes

•Mount your DVD/TV so that the AC power cord can be plugged directly into a power outlet. Do not use a converter or extension cord.

•Make sure that there is no slack in the AC power cord, because the cord acts as an FM wire antenna. Wind any slack cord onto the cord hook.

•Your DVD/TV has a built-in ferrite bar antenna for the AM radio. Check the AM radio reception before fixing it into position.

•To reduce electrical interference, mount your DVD/TV as far as possible from other electrical devices, such as refrigerators, microwave ovens, fluorescent lamps, and so on.

•Keep the paper template for possible future use.

8

www.insignia-products.com