Insignia ns-7utctv Using your TV, Setting the time, Changing the mode, Changing channels, Setting the timer, Changing the volume, Turning the power on and off

Insignia NS-7UTCTV 7" Under-the-Cabinet DVD/LCD TV

Using your TV	To switch between two channels:
	To switch between two channels:
	1	Press LAST to change from the currently
After the connections have been made and your		tuned channel to the previous channel.
DVD/TV has been mounted and plugged in, you	2	Press LAST again to change back to the
are ready to use your TV.		originally tuned channel.
		originally tuned channel.

Turning the power on and off

To turn the power on and off:

1Press the POWER button on the front panel of your DVD/TV or on the remote control. The POWER indicator turns green.

2To turn off your DVD/TV, press the POWER button again. The screen image disappears and the POWER indicator turns red.

Note

A small amount of electric power is consumed even when the power is turned off.

Making initial TV mode settings

To access and use the TV SETUP menu:

1Press SETUP. The TV SETUP menu opens.

Changing the volume

You can change the volume using your DVD/ TV’s front panel or the remote control.

To change the volume:

1Press VOL+ or VOL- on the remote control, or VOL + or VOL - on the TV to raise or lower the volume.

2Press MUTE on the remote control to mute the sound, and press it again (or the VOL+ or VOL- ) to restore the sound.

Changing the mode

Your DVD/TV supports multiple modes of operation.

To select the operating mode:

•Press the SOURCE button on your DVD/TV to select from the following modes:

•DVD

•TV

•AV

•FM

•AM

•ATSC

The name of the input source appears on the display panel when it is selected.

Or, press one of the following on the remote control to select the mode of your choice:

•DVD button

•TV button

•AV button

•FM/AM button

•DTV button

Changing channels

To change channels:

•Press CH+ or CH- on the remote control or press CH + or CH - on your DVD/TV.

Or, to enter a channel number directly, press the number buttons on the remote control.

2Press or to select the item you want to set.

3Press or to go to the item selected.

4When a confirmation is required, press OK to confirm your choice.

To automatically program channels into memory:

1Press SETUP. The TV SETUP menu opens.

2Press or to select AUTO MEMORY, then press OK or to begin memorizing the available channels.

3To stop the auto search, press .

Setting the time

To set the time:

1Press TIME on the remote control, or TIME/ ENT on your DVD/TV, twice.

2Press or to select the hour or minute

position, then press or to change the setting.

Setting the timer

The timer lets you set specific times for the TV to turn on and off. It also lets you set the signal source and the channel to watch.