Insignia
Specifications
LCD screen size | 7 inches | |
|
| |
Laser wavelength | 780/650nm | |
|
| |
Video system | NTSC | |
|
| |
Frequency | 20 Hz~20 KHz ±2.5 dB | |
response |
| |
|
| |
Audio | > 85 dB | |
| ||
|
| |
Audio distortion + | < | |
noise |
| |
|
| |
Channel separation | > 70 dB (1 KHz) | |
|
| |
Dynamic range | > 80 dB (1 KHz) | |
|
| |
Radio system | PLL | |
|
| |
Radio frequency | AM - 520~1710 KHz | |
range | FM - 87.5~107.9 MHz | |
|
| |
Power | 100~240 V AC 50/60 Hz | |
|
| |
Power consumption | <30 Watts | |
|
| |
Dimensions | 3.11 × 14.76 × 10.9 inches | |
(7.9 × 37.49 ×27.69 cm) | ||
| ||
|
| |
Weight | Approx. 6.83 lbs. (3.1 kg) | |
|
|
The following discs can be played in the DVD player.
Discs Label Contents Dimension
DVD | Audio + Video | 12 cm |
| (moving picture) |
|
CD | Audio | 12 cm |
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio or TV technician for help.
•Only a shielded interface cable should be used.
Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Insignia may void the user’s authority to operate the equipment.
Cables
Connections to this device must be made with shielded cables with metallic RF/EMI connector hoods to maintain compliance with FCC Rules and Regulations.
Canadian notice
This Class B digital apparatus meets all requirements of the Canadian
Avis Canadian
Cat apparel numerous de la classed B respected toutes les exigencies du règlement sur le materiel brouilleur du Canada.
Copyright© 2007 Insignia. Insignia and the Insignia logo are trademarks of Best Buy Enterprise Services, Inc. Other brands and product names are trademarks or registered trademarks of their respective holders. Specifications and features are subject to change without notice or obligation.
For service and support call (877)
Legal Notices
FCC Part 15This equipment has been tested and found to comply with the limit for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does not cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encourage to try to correct the interference by one or more of the following measures.
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
16 |