Insignia NS-H4005 Home Theater System

2Plug the left and right audio connectors on the supplied audio cable (A) into the left and right DVD/VCR AUDIO OUT L and R jacks on the back of your home theater system, then plug the connectors on the other end of the cable into the AUDIO IN L and R jacks on the back of the TV.

Note

If you use this connection, set the TV’s input source to

VIDEO.

To connect a TV with component or progressive scan jacks:

Note

The DVD player can play through the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jack.

The VCR and radio can only play through the standard A/V jacks.

1Plug the connectors on the supplied component A/V cable (C) into the COMPONENT/PROGRESSIVE SCAN VIDEO OUT (Y, Pb, and Pr) jacks on the back of the home theater system, then plug the connectors on the other end of the cable into the appropriate jacks on the back of the TV.

2Plug the left and right audio connectors on the supplied audio cable (A) into the left and right DVD/VCR AUDIO OUT L and R jacks on the back of your home theater system, then plug the connectors on the other end of the cable into the AUDIO IN L and R jacks on the back of the TV.

Note

If your television is a high-definition or “digital ready” television, you can use your home theater system’s progressive scan output for the highest video resolution possible.

If you are using a Progressive Scan connection, turn on Progressive Scan in the on-screen display (OSD). For more information, see “Using progressive scan” on page 44.

If your TV does not support the Progressive Scan format, the picture will appear scrambled if you turn on Progressive Scan.

16www.insignia-products.com