Insignia NS-H4005 Controlling videotape playback, STOP, PLAY, PLAY, PLAY, FORWARD, BACKWARD, PAUSE/STEP, PAUSE/STEP, To control videotape playback:

Insignia NS-H4005 Home Theater System

5To stop playback, press STOP .

Note

Your home theater system has an Auto Play System feature. If your home theater system is turned off and you insert a videotape with the erase-prevention tab removed, your home theater system automatically turns on and plays the videotape. When playback is complete, your home theater system rewinds and ejects the videotape, then turns off.

Controlling videotape playback

To control videotape playback:

•To search while the videotape is playing, press

BACKWARD or FORWARD . Press PLAY to resume normal playback.

Note

Horizontal lines appear in search mode. They will disappear when you resume playback.

Sound is muted while in search mode.

When you end high speed search mode, your home theater system takes a few seconds to stabilize the tape speed. During this time, you may see slight interference on the screen.

If the VCR is in search mode for more than three minutes, your home theater system starts normal playback to protect the videotape and video heads.

•To freeze the image and pause playback, press PAUSE/STEP . Press PLAY to resume normal playback.

Note

If the still picture vibrates vertically, press or to adjust the picture.

If the VCR is in still mode for more than three minutes, your home theater system goes into stop mode to protect the videotape and video heads.

•To advance the videotape one frame at a time, freeze the

image, then press PAUSE/STEP one or more times. Each time you press the button, the videotape advances one frame. Press PLAY to resume normal playback.

22www.insignia-products.com