Insignia NS-H4005 Marking a starting point on a videotape, Recording a videotape, ck, SLP, REC, REC, STOP, LINE, LINE, LINE, LINE, CLEAR, INPUT, SPEED, CLK/CNT, REC/ITR

Insignia NS-H4005 Home Theater System

Marking a starting point on a videotape

If you want to quickly locate a section of a videotape where you want playback to begin, you can add a marker to the videotape.

To mark a starting point on a videotape:

1Begin playing or recording a videotape.

2Press CLK/CNT twice to display the real-time counter (elapsed time).

3When the videotape reaches the point you want to mark, press CLEAR. The real-time counter is reset to 00:00:00.

4Continue to play or record.

5When playback or recording ends, press STOP twice.

6Press BACKWARD . The videotape rewinds to the place you marked and starts playback.

Recording a videotape

To record a videotape:

1Insert a videotape with an erase-prevention tab into the videotape compartment.

2Press INPUT to select LINE 1 or LINE 2. Select LINE 1 to record from a device connected to the A/V jacks on the back of your home theater system. Select LINE 2 to record from a device connected to the A/V jacks on the front of your home theater system.

3Press SPEED to select the tape speed. You can select SP or SLP. (Your home theater system does not support LP tape speed.)

4Press REC/ITR once. The REC indicator lights in the display window, and your home theater system starts recording.

Note

If the videotape does not have an erase-prevention tab, the videotape is ejected.

The REC indicator only appears when your home theater system is in VCR mode.

5If you want to pause the recording, press PAUSE/STEP . The REC indicator flashes in the display window.

Note

If the VCR is in pause mode for more than five minutes, your home theater system goes into stop mode to protect the videotape and video heads.

28www.insignia-products.com