Insignia NS-LCD26A LCD TV

Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the television and camcorder or video game console.

Note

Cables are often color-coded to connectors. Connect red to red, white to white, and yellow to yellow.

Note

•For better video, you can use the S-video terminal if your source supports it.

•The S-video terminal shares the same audio jacks with VIDEO1 and has priority over the VIDEO1 and VIDEO2 jacks. To use a device connected to the video jacks, disconnect any plug from the S-video terminal.

To play the camcorder:

1Turn on your television, then press the INPUT button. The SOURCE INPUT menu opens.

2Press or to select Composite-2, then press OK to confirm.

3Turn on your camcorder and set it to output mode.

4Insert a videotape, then press .

Note

For more information about using your camcorder or video game console, see your user guide.

Connecting an HDMI device

VGA

HDMI cable

TV right side

Device with HDMI output

Connect the HDMI cable between the HDMI interface on the television and HDMI output on the device.

To play from the device using HDMI:

1Turn on your television, then press the INPUT button. The SOURCE INPUT menu opens.

2 Press or to select HDMI-1or HDMI-2, then press OK to confirm.

3Turn on your device and set it to the correct mode.

Note

For more information about using your HDMI device, see your user guide.

Connecting component video

Component video cable

Audio cable

TV right side

Device with component video

To connect the device:

1Connect the component video cable between the Y, Cb/Pb, Cr/Pr input jacks on the television and the Y, Cb/Pb, Cr/Pr output jacks on the device.

2Connect the audio cable between the AUDIO input jacks on the television and the AUDIO output jacks on the device.

Note

Cables are often color-coded to connectors. Connect red to red, white to white, green to green, and blue to blue.

To play component video from a device:

1Turn on your television, then press the INPUT button. The SOURCE INPUT menu opens.

2Press or to select Component-1or Component-2, then press OK to confirm.

3Turn on your device and set it to the correct mode.

Note

For more information about using your component video device, see your user guide.

www.insignia-products.com

9