Insignia
Category | Problem | Possible Solution |
|
|
|
General | One or more | • These channels may be |
| channels can't | locked. Use the parental |
| be displayed | controls to unlock them. |
|
| • These channels may be set |
|
| to Not Viewable in the |
|
| channel list. Set the channel |
|
| to Viewable or select the |
|
| channel with the |
|
| buttons. |
|
|
|
| Lost password | • Use the super password |
|
| (1397) to access the |
|
| Password Set menu and set |
|
| a new password as desired. |
|
| Write down your new |
|
| password. |
|
|
|
| Some items | • If a setting option appears in |
| can't be | gray, this indicates that the |
| accessed | settings option is unavailable |
|
| in current input mode. |
|
|
|
| Television | • When the television is in use, |
| cabinet creaks | there is a natural rise in |
|
| temperature, causing the |
|
| cabinet to expand or contract |
|
| and may be accompanied by |
|
| a slight creaking noise. This |
|
| is not a malfunction. |
|
|
|
| Control buttons | • Disconnect the power cord |
| do not operate | and wait for a few seconds. |
|
| Then |
|
| cord and turn on the |
|
| television again. |
|
|
|
| Caution |
|
| Never attempt to repair a defective television | |
| yourself. |
|
|
|
|
|
|
|
| Note |
|
| If your problem is not solved, turn your television | |
| off and then on again. | |
|
|
|
Specifications
Note
•Design and specifications are subject to change without notice.
•Weight and dimensions shown are approximate.
•Specifications and external appearance may be changed for the sake of improvement.
Type | LCD TV |
|
|
TV system | American TV standard ATSC/NTSC system |
|
|
Receiving channels | VHF |
| |
|
|
Audio multiplex | BTSC system |
|
|
Audio out | 6W x 2 |
|
|
Power requirement | AC 120 V. 60 Hz |
|
|
Power | 120 W |
consumption |
|
|
|
Dimensions | 27 x 21.8 x |
| (685 x 553 x 231 mm) |
|
|
Weight | 42 lbs/19 kg |
|
|
Input terminals | 2 Composite Video/Audio (L/R) | |
| 1 | |
| 2 | Component Video/Audio (L/R) |
| 2 | HDMI interface |
| 1 | VGA/Audio |
| 1 | Antenna |
|
| |
Output terminals | 1 Composite Video/Audio (L/R) | |
| 1 | S/PDIF optical digital audio out |
| 1 headphone jack | |
|
| |
Control terminals | 1 | |
|
|
|
Programming the remote control
Introduction
Your remote lets you control four devices with one
Note
The universal remote control unit can't be programmed to control a different brand of television. It has been preset to control this television set and this preset is unchangeable.
Programming a device
To control a VCR or DVD, cable or satellite receiver, amplifier or tuner, and auxiliary device, follow these steps. Before proceeding, find the codes for the devices you want to program in the following tables and write them down or highlight them.
Note
To program a DVD player, portable DVD player, or mobile DVD player, use the DVD key.
To program a device:
1Turn on the device (for example, the DVD player) and, if needed, load the media (for example, a DVD).
2Press the DVD, CBL, or AUX button.
3Press and hold SET until the red LED blinks twice, then release the button.
4Enter the first
Note
If the LED does not blink twice, repeat steps 2 to 4 and try entering the code again.
5Aim the remote at the device and press Power. The device should turn off. If it does not, repeat steps 3 to 5, trying each code for your brand until you find one that works. If you cannot find a code that works, see “Searching for Your Code”
22 |