Insignia NS-MDDVD10 10

		Insignia NS-MDDVD10 Dual-Screen Portable DVD Player
	To connect a television to the DVD player:	• Connect the white plug to the outside
		jack.
		3 Connect the plugs from the other end of the
		audio/video cable to the jacks on the stereo
		receiver or amplifier:
		• Connect the red plug to the right audio in
		jack.
		• Connect the white plug to the left audio in
		jack.
	1 Move the AV In/DVD switch to DVD.	• The yellow plug does not need to be
	2 Connect plugs from the one end of the audio/	connected.
	2 Connect plugs from the one end of the audio/	Connecting the monitor and DVD player to
	video cable (included) to the Video and	Connecting the monitor and DVD player to
	Audio In/Out jacks on the left side of the	other equipment
	DVD player:	You can play a DVD in the main unit and use a
	• Connect the yellow plug to the jack	You can play a DVD in the main unit and use a
	• Connect the yellow plug to the jack	game system or other video equipment with the
	nearest the Headphone jack.	game system or other video equipment with the
	nearest the Headphone jack.	monitor at the same time.
		monitor at the same time.

•Connect the red plug to the center jack.

• Connect the white plug to the outside	To connect the monitor and DVD player to
jack.	other equipment:

3Connect the plugs from the other end of the audio/video cable to the jacks on the TV:

•Connect the yellow plug to the video in jack.

•Connect the red plug to the right audio in jack.

•Connect the white plug to the left audio in jack.

4To watch a DVD on the TV:

•Turn on the DVD player and slide the AV In/DVD switch to DVD.

•Turn on the TV and follow instructions provided by the television manufacturer to play the DVD.

Note:

If your TV does not have audio/video inputs, you will need to purchase an RF modulator (sold separately) and follow the instructions included with it to connect the unit to your TV.

Connecting a stereo receiver or amplifier to the DVD player

You can connect a stereo receiver or an amplifier to the main unit of the DVD player using the audio/video cable.

This unit can play Dolby Digital, but only in two channels.

To connect a stereo receiver or amplifier to the DVD player:

Left side of main unit

Bottom of monitor

Right side of main unit

Game console or other video equipment

Audio/Video cable (included)

1Connect the built-in DIN cable from the bottom of the monitor to the Main Unit port on the right side of the main unit.

2Connect the plugs from the one end of the audio/video cable (included) to the Video and Audio In jacks on the monitor:

•Connect the yellow plug to the outside jack.

•Connect the white plug to the center jack.

•Connect the red plug to the jack nearest the built-in DIN cable.

3Connect the plugs from the other end of the audio/video cable to the jacks on the game console or other video equipment:

1Move the AV In/DVD switch to DVD.

2Connect plugs from the one end of the audio/ video cable (included) to the Video and Audio In/Out jacks on the left side of the DVD player:

•Connect the red plug to the right audio out jack.

•Connect the white plug to the left audio out jack.

•Connect the yellow plug to the video out jack.

•Connect the yellow plug to the jack nearest the Headphone jack.

•Connect the red plug to the center jack.

10	www.insignia-products.com