Insignia
To connect the DC power cord:
Car power adapter
3 Tightly wrap the mounting strap around the headrest.
1Connect the
2Connect the plug end of the car power adapter to the DC In 9V/Car Plug
3Connect the lighter plug end of the car power adapter to the cigarette lighter socket.
Installing the DVD player/monitor in car
Use the supplied mounting strap to install the DVD player and monitor onto the seat back in a car.
4Make connections as shown. Adjust the screen and strap as necessary for optimal viewing angle.
Mounting strap | Mountingstrap |
Warning | • This unit should never be used by the |
| vehicle's driver or left unsecured in the |
| vehicle while driving. |
•If this unit is being used in your vehicle, be sure that it is secured or held safely and does not obstruct any safety device, including air bags or seat belts.
•All passengers should wear seat belts when using this unit in a moving vehicle.
•If in doubt, contact your vehicle manufacturer for further advice.
To install the unit/monitor:
1Loosen the elastic safety band and mounting strap on the back of the unit/monitor.
| Safety |
| band |
| |
Car | DIN cable |
power adapter
Remote control
Elastic safety band
Mounting strap
2Loop the safety band around the headrest.
Connecting the monitor to DVD player or
VCR
To connect the monitor to DVD player or a VCR:
DVD player/VCR
Audio/Video cable (included)
1Move the AV 1 / AV 2 switch on the left side of the DVD player to AV 1.
2Connect the plugs from the one end of the audio/video cable (included) to the Video and Audio In jacks on the monitor:
•Connect the yellow plug to the outside jack.
•Connect the white plug to the center jack.
•Connect the red plug to the jack nearest the
8 |