Insignia
Parents can control viewing privileges by using | Loading a DVD or CD | |
the parental lock, which is set up with levels for | 1 Open the disc door by pressing and holding | |
appropriate viewing. Control of viewing may vary | ||
the Open button. | ||
from disc to disc. For example, if the disc allows, | ||
| ||
you could lock out violent scenes unsuitable for |
| |
children or you could lock out playback of the |
| |
disc altogether. |
|
To set a rating:
1 Press the Setup button in stop mode.
2Press the right or left cursor button to select
Rating, then press the Enter button.
Open button
l | l |
|
|
3Press the up or down cursor button to select Parental Lock, then press the Enter button repeatedly until you see the lock level/rating setting desired.
The parental lock levels are equivalent to the following ratings:
1: KID SAFE | 5: |
2: G | 6: R |
|
|
3: PG | 7: |
|
|
4: | 8: ADULT |
Note:
You cannot play DVDs rated higher than the level you selected unless you cancel the parental lock function.
An icon on the screen indicates whether the lock is active:
Indicates parental lock is not active
Indicates the parental lock is active
4Press the up or down cursor button to select Password. Enter your
5If you forget your password, you can erase your current password by pressing the 8 on the remote control four times, then pressing the Enter button to confirm the setting (Password: 8888). Reset your password as instructed in step 4.
6Press the up or down cursor button to select Factory Set to return to factory settings. Press the Enter button to toggle between Yes and No. It takes 3 to 5 seconds to reset the unit to the factory default.
7To exit the Setup Menu and return to the normal screen, press Return.
2Hold the disc by its sides and place it on the central support with the printed side facing towards you until you hear a click.
3Close the disc door. It takes a short while for your unit to load the disc. After loading, the unit will automatically start playing most DVDs.
4If the DVD does not start automatically, press the Play button.
Using the DVD player and monitor with other equipment
To use a game system or external video equipment with the DVD player:
1Turn on the unit and slide the AV In/DVD switch to AV In.
2Turn on the video equipment and follow the instructions provided with it to playback the disc.
Note:
If you have a mono VCR, the volume level from the speakers will be low.
To watch a DVD on your TV with the DVD player:
1Turn on the unit and slide the AV In/DVD switch to DVD.
2Turn on the TV and follow the instructions provided with it to play the DVD.
To use other audio equipment with the DVD player:
1Turn on the unit and slide the AV In/DVD switch to DVD.
2Turn on your audio equipment and follow the instructions included with it to select the Audio In function.
Note:
•You may experience interference if the radio tuner function is selected while the television is working.
13 |