|
|
|
|
|
|
| Insignia | |||||
• | Make sure to use the correct audio/video cable. | 2 Four speeds are available: x2, x4, x8, and | ||||||||||
| Connecting the plugs incorrectly may cause a weak signal. | x20. Press and hold Search >> or << Search | ||||||||||
• | If you have a stereo VCR, make sure you set it to stereo | to change the speed of fast scan. | ||||||||||
| mode. |
|
|
|
|
|
| |||||
• Due to copyright protection, DVD movies cannot be copied. | The speed of fast scan | |||||||||||
| If you copy a DVD movie onto a videotape, the resulting |
|
|
|
|
|
| |||||
|
|
|
|
|
|
| ||||||
| copy will be unclear, with poor sound quality. This is not |
|
|
|
|
|
| |||||
|
|
|
|
|
|
| ||||||
| caused by a defective DVD system. |
|
|
|
|
|
| |||||
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
To use an external DVD player or VCR with the monitor:
1Turn on the monitor and slide the AV 1 / AV 2 switch to AV 1.
2Turn on the DVD player or VCR and follow the instructions provided with it to play the disc.
Note:
If you have a mono VCR, the volume level from the speakers will be low.
To use a video game system with the monitor:
1Turn on the monitor and slide the AV 1 / AV 2 switch to AV 1.
2Turn on the video game system and follow the instructions provided with it to play game.
Playing discs
After turning on the power and loading a DVD or CD, use the following functions to operate the DVD player.
Pausing playback (Still mode)
To pause play:
1Press the Pause button to pause playback.
2To resume normal playback, press Play. Each time you press the Pause button, the picture advances one frame.
Stopping playback
To stop play:
1Press the Stop button at the location where you want to interrupt playback. To resume playback at the position where the disc was stopped, press the Play button.
2Press Stop twice to clear the main unit’s memory. Press Play again to reset the disc to the beginning.
Skipping tracks
To skip to a different track:
1Press the Prev button repeatedly to skip to the start of the current or previous track.
2Press the Next button to skip to the next track.
3For audio CD discs, use the number buttons (on the remote control only) to jump straight to a track number.
Scanning with fast forward/fast reverse
To scan DVDs:
1Press the Search >> or << Search buttons when a disc is playing. The disc begins fast scan at x2 speed.
3Press the Play button when you reach the desired point to resume playback at normal speed.
Note:
You also can press and hold the Prev or Next buttons repeatedly to select different fast scan speeds.
Skipping with forward or reverse
To skip forward or backward:
1While playing a disc, press the Next button to move to the beginning of the next chapter or track.
2Press the Prev button to move to previous chapter or track. The selected chapter or track will start playing automatically.
Audio selection
On some discs, the sound is recorded in two or more formats.
To select the type of playback:
1While a disc is playing, press the Audio button to show current audio format number.
2Press the Audio button repeatedly to select the desired audio format.
Note:
If only one audio format is recorded, the number does not change. About two seconds later, playback continues in the new audio format.
Subtitle selection
To select a subtitle:
1While a disc is playing, press the Subtitle/ Return button to display the current language setting.
2Press the Subtitle/Return button repeatedly to select the desired subtitle language.
Note:
•If only one language is recorded, the language does not change. About two seconds later, playback continues with the new subtitle you selected.
•The number of languages recorded differs depending on the disc.
•If no button is pressed within a few seconds, playback continues without changing the current subtitle.
•This function can only be used for discs on which subtitles have been recorded in multiple languages.
•On some DVDs, subtitles are activated from the main menu of the DVD. Press the Menu button to activate the main menu.
14 |