Insignia NS-P502Q-10A, NS-P501Q-10A, NS-P42Q10A manual Back, # Jack, Button

NS-P42Q-P501Q-P502Q-10A_09-0100_MAN_V1_English.book Page 7 Friday, March 20, 2009 3:11 PM

Back Remote control

# Jack

1Power in

2SERVICE

3AUDIO OUT R-AUDIO-L

4EX-LINK

5DVI AUDIO IN R-AUDIO-L

6HDMI IN 1/ HDMI IN 2 (DVI)

7ANT IN

COMPONENT IN 2 PR, PB, Y

8and R-AUDIO-L AV1 IN VIDEO and R-AUDIO-L

9COMPONENT IN 2 PR, PB, Y and AUDIO L/R

10DIGITAL AUDIO OUT (OPTICAL)

Description

Connect the power cord to this jack.

Used for service only.

Connect an analog audio amplifier to these jacks. For more information, see “Connecting an analog audio amplifier” on page 13.

Used for service only.

Connect the audio for a DVI device to these jacks. For more information, see “Connecting a DVI device” on page 12.

Connect an HDMI device to either HDMI jack. For more information, see “Connecting an HDMI device” on page 12.

Connect a DVI device to the HDMI IN 2 jack. For more information, see “Connecting a DVI device” on page 12.

Connect the cable for an outdoor antenna or cable TV to this jack. For more information, see “Connecting an outdoor antenna” on page 10 or “Connecting cable TV” on page 10.

Connect a component video device to these jacks, or connect an analog video device to the Y/VIDEO jack and the audio jacks. For more information, see “Connecting a component video device” on page 13 or “Connecting a VCR” on page 11.

Connect a component video device to these jacks. For more information, see “Connecting a component video device” on page 13.

Connect a digital audio amplifier to this jack. For more information, see “Connecting a digital audio amplifier” on page 13.

#

1

2

3

4

5

6

7

8

9

Button

POWER

Numbers

—

MUTE

VOL+/VOL–

MENU

ENTER

MTS

Description

Press to turn your TV on or off (standby mode). When you turn off your TV, power still flows into it. To disconnect power, turn off the surge protector (if you are using one) or unplug the power cord.

Press to change the channel. For more information, see “Selecting a channel” on page 18.

Press to select a sub-channel. For more information, see “Selecting a channel” on page 18.

Press to turn off the sound. Press again to turn the sound back on.

Press to increase or decrease the volume.

Press to open the on-screen menu.

In the on-screen menu, press to select menu items or adjust settings.

In the on-screen menu, press to confirm selections or changes.

Press to select the audio mode. You can select Stereo, Mono, or SAP (separate audio program).

www.insigniaproducts.com 7