Adjusting menu settings, Setup Plug & Play

NS-P42Q-P501Q-P502Q-10A_09-0100_MAN_V1_English.book Page 37 Friday, March 20, 2009 3:11 PM

2Press or to highlight Setup, then press ENTER to access the Setup menu.

Channel

Setup Plug & Play

Input	Language	: English
	Time
	Game Mode	: Off
	V-Chip
	Caption
	Energy Saving	: Off

3Press or to highlight Time, then press ENTER. The Time menu opens.

			Time

		Clock	: 12:14 am
		Sleep Timer	: Off

		Timer 1	: Inactivated
		Timer 2	: Inactivated
		Timer 3	: Inactivated

4Press or to highlight Timer 1, Timer 2, or Timer 3, then press ENTER to access the Timer screen. The cursor is on the first time field under On Time.

Timer 1

On Time
12	00		am	Inactivate
Off Time
12	00		am	Inactivate
Volume	Antenna		Channel
10		Air		3
Repeat	Sun Mon	Tue	Wed The	Fri	Sat
Once

5Press or to change an item. Press or to move from item to item. You need to set:

•On Time—Sets the time your TV turns on.

•Off Time—Sets the time your TV turns off.

•Inactive/Active—Turns the timer on or off.

•Volume—Sets the volume level.

•Antenna—Selects the TV signal source. You can select Air (antenna) or Cable (cable TV).

•Channel—Selects the channel you want the TV tuned to when it turns on.

•Repeat—Sets the repeat mode for the timer. You can set the timer to activate once or on one or more days of the week. After you select a day of the week, press ENTER. A check mark appears in the box below the day.

6Press RETURN to return to the previous menu or EXIT to close the menu.

Note

If the timer turns on your TV and no controls or buttons are used for three hours, your TV automatically turns off to prevent over-heating.