®
We are delighted that you have chosen the InSinkErator® Instant Hot Water Dispenser to be a part of your home. This unique appliance will save you time and effort in the kitchen, and you’ll enjoy discovering new uses for it each day. That’s exactly why millions of people are now using an InSinkErator Instant Hot Water Dispenser.
We are confident that by following our
WHAT YOU SHOULD KNOW BEFORE YOU BEGIN
QFor your satisfaction and safety, read all instructions, cautions, warnings and dangers before installing or using this instant hot water dispenser.
QThis particular unit is not intended for commercial use.
QMake sure that all electrical wiring and connections conform to local codes.
QA standard
QThe wall outlet powering your dispenser must have power supplied to it continuously.
QThis outlet must be fused and should not be controlled by the same wall switch that operates the disposer, unless you have a SinkTop Switch™ from InSinkErator®.
QIt is recommended that a dedicated control valve be installed on the cold water line supplying water to this system.
QIf you suspect elevated levels of chlorine in your water, it is recommended to use our water filtration system.
QThe use of a water filter should NOT result in the water pressure to drop below 30 psi (207kPa). If it does, this will prevent your unit from operating properly.
QMoving parts inside the tank causing a rattling noise is normal.
WHAT YOU NEED TO GET STARTED
Equipment Required:
Q Drill | Q Phillips and flat blade screwdrivers |
Q | Q Pencil |
Q Dedicated control valve | Q Tape measure |
Q Adjustable wrench | Q Level |
Equipment You May Need:
Q Anchors for drywall | Q Basin wrench |
Q Hole saw | Q Hole punch |
If you intend to use the sprayer hole in your sink for your dispenser, you may need a basin wrench and a 1/8" plug or a 1/4" cap (not supplied) for the faucet spray hose line. See Step
If you need to cut a mounting hole in your stainless steel sink, you may need a 11⁄4" - 11⁄2" hole saw made for cutting stainless steel or a hole punch. Consult a professional if you are drilling into a surface other than stainless steel.
2
