Integra DPC-6.1 Additional Playback Functions, Next Selection Preparing the next Audio Track, Tip

Additional Playback Functions

Numeric buttons	1	2	3
	7	8	9
	4	5	6
	+10	0

DISC 1–6		DISC +/–
		NEXT
	REMOTE CONTROLLER RC-426DV	SELECTION

CD

Next Selection: Preparing the next Audio Track

During playback of an audio CD, you can already prepare the next track that will be played as soon as the current one is finished. The difference with direct selection of a track or disc is that playback of the prepared track starts only after the current track is finished (i.e. not right away).

1 NEXT			During playback of an audio CD, press		Tip:
SELECTION			the NEXT SELECTION button on the	You can also use the DISC SKIP button on the DPC-6.1 to select
			DPC-6.1 or the remote controller to	the next disc.
			activate this function.	■ Checking the next selection
			NEXT indicator
			flashes
					1	Press the NEXT SELECTION button to
			The NEXT indicator flashes and the disc
						confirm your selection.
			number and track number disappear on		SELECTION	The disc number flashes and the track
					NEXT
			the display.			number lights up continuously. After a
						few moments, the disc and track
2 DISC 1	DISC 2	DISC 3 Use the DISC 1 – 6 buttons (or DISC +
						numbers of the currently playing track
DISC 4	DISC 5	DISC 6	and DISC –) to select the disc that			reappear.
			contains the next track you want to
			listen to.
			The number of the selected disc and
			the “NEXT” indicator flash and the “AL”
						You can check the next selection by
			appears on the display.
						pressing the NEXT SELECTION button.
						As soon as the current track is finished,
						the DVD Changer will play back the pre-
						pared track (or disc if you selected “AL”).

AL: means that all tracks will be played back.

				If you wish to play all tracks of the se-	Notes:
				lected disc, press the NEXT SELECTION
				button again to confirm the operation.	• The	/	buttons are disabled while the Next Selection
				Skip to Step 3 to select the track number.	function is activated. Pressing the DISC SKIP buttons or DISC
				If you do not press the NEXT SELECTION	+/– buttons will cancel the Next Select function.
					• You can only prepare one track with Next Selection. See
				button, the operation will be confirmed
					“Programming Memory Sequences” on page 22 for how to
				when the number and the “NEXT” indi-
					prepare a series of tracks. Preparing yet another track before
				cator stop flashing.	the previously entered Next Selection command has been
					executed overrides your first setting, so that only the second
3				Select the track using the numeric buttons.
	1	2	3		Next Selection is carried out.
					• If you stop playback by pressing the			STOP button, the Next
	4	5	6	The number of the selected track lights
					Selection function is cancelled.
				up on the display.
	7	8	9
					■ Cancelling the Next Selection function
	+10	0		In that case, the display looks as follows:
					If you decide not to take advantage of the Next Selec-
					tion function after all, proceed as follows:
					1. Press the NEXT SELECTION button.
Notes:					The disc numbers flash on the display.
					2. Press the CLEAR button.
• This function is only available for audio CDs (when the CD					3. Press the NEXT SELECTION button again.
	indicator lights).				The NEXT indicator goes dark and the function is

• You need to press one of these buttons within 8 seconds after	cancelled.
pressing NEXT SELECTION. Otherwise, the Next Selection func-
tion will be cancelled. In that case, start again with step 1.

24