Fedders Portable Dehumidifier Introduction, Description of Parts on the, Portable Cooling Unit

				Introduction
Description of Parts on the		3		Control
Portable Cooling Unit
				Panel
	Control Panel Use the electronic control panel to select
	the mode, fan speed, set the timer, or		Air Outlet
	view the current and set room
	temperature.
	Air Outlet The air outlet discharges the air from the
	unit into the room. Use the adjustable
	louvers to direct the air.
	Handles Use the handles to help move the unit
	around the room
	Casters Allow you to move the unit from one
	room to another without lifting		Handle
	Room Air Intake Brings room air into the unit for cooling
	or dehumidifying
	System Air Intake Outside air is brought into the unit to
	cool the internal components.
	Exhaust Port Exhausts warm air from the internal
	components to the outside.
	Serial Plate Identifies unit model and serial number
	Drain Valve Drains the internal condensation tank			Caster
	Power Cord Uses a 3-pronged, grounding plug and
	must be plugged into a properly
	grounded outlet. Do not alter cord or
	plug end. Do not use an extension cord.			Room
				Air Intake
Before you start
•	Read the instruction manual before operating the unit			Exhaust Port
	for the first time. It contains important information on		System
	operation, safety, maintenance, service and warranty.
			Air Intake
•	Do not start a damaged unit.
•	The assembly and connection of the unit must be carried			Serial Plate
	out according to the instructions. If they are not
	followed you run the risk of voiding the warranty.
•	The power cord is located in the rear of the unit. Do not
	use plug adapters or extension cords. Do not alter plug
	end. Only use a grounded electrical outlet.
•	Do not allow contact between the unit and water.
•	Do not cover the air outlet or air intake		Drain Valve	Power Cord
	louvers of the unit.
• To avoid the possibility of personal injury, always
	disconnect the power supply to the unit before installing
	and /or servicing.
		3