Integra DPS-7.3 instruction manual Making discrete 5.1 channel Analog Output connections

Connecting to an Amplifier

(To Enjoy the Sound Advantage of the DVD Player)

Although you can reproduce the DVD Player’s sound from the TV speakers with the connections on pages 13 and 14, connecting with an amplifier provides you high quality dynamic sounds.

Before connecting

•Refer to the instruction manual of the amplifier.

•When you connect the DVD Player to the amplifier, be sure to turn off the power and unplug both units from the mains before making any connections. Otherwise, the speakers may be damaged.

•Connect the plugs securely.

Incomplete

Insert completely

Notes

•The remote controller supplied with Integra/ONKYO amplifier can be used to operate the DVD player.

•The function of the upper and lower z connectors are the same. Connect to either one.

•Connecting z cable only does not make the system operational. You must also connect the audio cables as well.

•When using the optical input jack, remove the

protective cap and keep it safely. When the jack is not used, replace the protective cap.

• This player uses parts which are sensitive to heat. Do not set this player on top of an amplifier or other product which emits heat.

Making discrete 5.1 channel ANALOG OUTPUT connections

The discrete ANALOG OUTPUT jacks are intended to deliver up to 5.1 channels of multi channel audio from DVD-Video and DVD-Audio sources. Connections can be made from the ANALOG OUTPUT FRONT, SURR (surround), CENTER, and SUBWOOFER jacks to the corresponding input jacks on an AV component with multi channel discrete audio input jacks.

Note

To ensure proper delivery of sound, be sure to match the names of the jacks on the DVD Player and the component being connected to.

: Signal flow

IRRS-232

OUT

BE sure to set the digital output setting after connection using the Setup Navigator explained in “Setting Up the Player” starting on page 17 or the function setting menu explained in “Adjusting Audio and Video Settings” starting on page 41.

Audio connection cables

To audio inputs

FRONT L

FRONT R

SURROUND L

SURROUND R

CENTER

SUBWOOFER	An amplifier with 5.1
z cable	channel discrete input
To z jack

AC INLET

VIDEO OUTPUT ANALOG OUTPUT DIGITAL OUTPUT

IN	Y	PB	PR	VIDEO	CH 1	CH 2 FRONT SURR CENTER	REMOTE
						OPTICAL	CONTROL
					L		COAXIAL
	CH1
	CH2				R
		COMPONENT		S VIDEO		SUB
						WOOFER

DVD AUDIO/VIDEO PLAYER

MODEL NO. DPS-7.3

DO NOT connect the mains lead at this time.

■Making a digital connection with the amplifier

If your amplifier has a digital input jack, be sure to connect it to either DIGITAL OUTPUT OPTICAL or COAXIAL jack on the DVD player.

Note

DO NOT connect to the AC-3RF input (e.g. of a Dolby Digital

receiver) which is reserved only for video disc players.

zcable To z jack

Coaxial connection cable

To digital coaxial jack

Optical fiber connection cable

To digital optical jack

An amplifier with a Dolby Digital/DTS/MPEG1/MPEG2 decoder

15