Adjusting Audio and Video Settings
Adjusting the Video Quality
You can adjust any or all of the following picture quality factors:
Prog. Motion
When using progressive scan, this adjusts the motion and still picture quality.
PureCinema
When watching DVD movies, PureCinema optimizes the picture quality. The default setting is Auto1, but if the picture appears unnatural, then set to Auto2, On or Off as desired and adjust the Prog. Motion setting (see above). See PureCinema in the Glossary starting on page 160.
YNR
Adjusts the amount of noise reduction (NR) applied to the Y (brightness) component.
CNR
Adjusts the amount of noise reduction (NR) applied to the C (colour) component.
MNR (Mosquito Noise Reduction)
Adjusts the amount of noise reduction applied to the mosquito noise (video artifacts on the edge of the image resulting from MPEG compression).
BNR (Block Noise Reduction)
Adjusts the amount of noise reduction applied to the block noise.
Sharpness High
Adjusts the sharpness of the
Sharpness Mid
Adjusts the sharpness of the
Detail
Adjusts how sharp edges appear in the picture.
White Level
Adjusts the intensity of white in the picture.
Black Level
Adjusts the intensity of black in the picture.
■Adjusting the picture quality settings
– To create your own setting (2)
1Use the cursor button (3) to select [Start] then press
ENTER.
Video Memory Select
Video Setup
2Use the cursor button (∞) to select [Video Setup] and press
ENTER.
3Press DISPLAY.
|
|
|
|
|
| Page 1/2 | |||||
Prog.Motion |
| fast |
|
|
|
|
| slow | |||
|
|
|
|
|
| ||||||
PureCinema |
| Auto1 | Auto2 | On Off | |||||||
YNR |
| Off |
|
|
|
|
|
| max | ||
CNR |
| Off |
|
|
|
|
| max | |||
MNR |
| Off |
|
|
|
|
|
| max | ||
|
|
|
|
|
| ||||||
|
|
|
|
|
| ||||||
BNR |
| Off |
|
|
|
|
|
| max | ||
Sharpness High |
| soft |
|
|
|
|
| fine | |||
Sharpness Mid |
| soft |
|
|
|
|
| fine | |||
Memory |
|
| Off |
| 1 | 2 | 3 | ||||
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
| |||||
|
|
|
|
|
| Page 2/2 | |||||
Detail |
| Off |
|
|
|
|
| max | |||
White Level |
| min |
|
|
|
|
| max | |||
Black Level |
| min |
|
|
|
|
| max | |||
Black Setup |
|
| 0 IRE |
| 7.5 IRE | ||||||
Gamma |
|
| – |
|
|
|
|
| + | ||
|
|
|
|
|
| ||||||
Hue | green |
|
|
|
|
| red | ||||
Chroma Level |
| min |
|
|
|
|
| max | |||
Chroma Delay |
|
| – |
|
|
|
|
| + | ||
Memory |
|
| Off | 1 | 2 | 3 | |||||
|
|
|
|
|
|
|
|
|
|
|
|
4Use the cursor buttons (5/∞) to select the setting and use the cursor buttons (2/3) to adjust the settings.
Adjust these while a disc is playing to see the effect of changes immediately.
Black Setup
For correction of floating black colour.
Gamma
Adjusts the brightness of the darker images in the picture.
Hue
Adjusts the overall colour balance between red and green.
Chroma Level
Adjusts how saturated colours appear.
Chroma Delay
Compensates for misalignment of the Y (brightness) and the C (colour) components.
5Use the cursor buttons (2/3/5/∞) to adjust the settings.
Adjust these while a disc is playing to see the effect of changes immediately.
6Repeat steps 4 and 5 to make adjustments to other settings.
If you would like to save the settings in the player’s memory, be sure to select either [1], [2], or [3] in the [Memory] setting to establish which memory location to save the new settings in. Please note that if you select a location where settings have already been saved, the old settings will be replaced by the new ones.
5To memorize the setting, select Memory 1, 2, 3, then press
ENTER.
The previous setting will be erased.
|
|
|
|
|
Memory |
| Off | 1 | 2 3 |
Move | ENTER Select | DISPLAY | Check | |
|
|
|
|
|
7When you are finished making adjustments, press ENTER to establish the new settings.
Expert
denotes more detailed settings. If the item is not displayed, please refer to page 42 to display it.
50
