Integra DPS-7.3 instruction manual DTS Out, Linear PCM Out, Mpeg Out, Digital Out Expert

Adjusting Audio and Video Settings

Setting the Audio 1 Options

■DTS Out

This player is capable of outputting DTS digital audio for DVDs recorded in DTS. When this player is connected to an AV component that has a built-in DTS decoder, select [DTS]. If your system is not equipped to decode DTS, select [DTS 3 PCM]. Refer to the operating instructions supplied with your audio components if you are unsure about compatibility with DTS.

Audio1	A2	Video1	V2	Language	General
		Audio DRC		— Off
	Dolby Digital Out			— Dolby Digital
		DTS Out		DTS
	Linear PCM Out			DTS3PCM
		MPEG Out		— MPEG 3PCM

Change DTS output mode
Move	SETUP Exit

Settings: DTS

DTS 3 PCM

Note

If you have made digital audio connections to component(s) not equipped to decode the DTS digital bitstream, be sure to select [DTS

3PCM]. If a DTS signal is output without decoding, the output is digital noise that could potentially cause damage to your speakers.

■Linear PCM Out

If your AV amplifier (or other connected component) is compatible with high sampling rates (96 kHz), set this to [Down Sample Off], otherwise set it to [Down Sample On] (96 kHz audio is converted to a more compatible 48 kHz). Check the manual that came with the other component if you’re unsure whether it is 96 kHz compatible.

Audio1	A2	Video1	V2	Language		General
		Audio DRC		— Off
	Dolby Digital Out			— Dolby Digital
		DTS Out		— DTS 3PCM
	Linear PCM Out				Down Sample On
		MPEG Out			Down Sample Off
Change PCM output mode
	Move					SETUP Exit

Settings: Down Sample On (Factory setting)

Down Sample Off

Note

On DVDs that contain copy protection, the 96 kHz signal may only be output from the analog audio jacks.

■MPEG Out

This player is capable of outputting the MPEG digital bitstream. When the player is connected to an AV component that has a built-in MPEG decoder, select the [MPEG] setting. Otherwise, select [MPEG 3 PCM] to convert the digital signal to the PCM signal, the digital signal output from a CD.

Audio1	A2 Video1 V2		Language General
	Audio DRC		— Off
	Dolby Digital Out		— Dolby Digital
		DTS Out	— DTS 3 PCM
	Linear PCM Out		MPEG
	MPEG Out		MPEG 3 PCM
Change MPEG audio output mode
	Move		SETUP	Exit
Settings:		MPEG

MPEG 3 PCM

■Digital Out Expert

Depending on your preferences and the type of connections made, you may opt not to have the digital audio signal output at all. When this setting is set to [Off] there is no signal output from the digital audio output jacks.

Make changes to the [Digital Out] setting in the Setup screen Audio menu in the [Expert] menu mode (page 42).

Audio1	A2 Video1 V2	Language General
	Audio DRC	— Off
	Dolby Digital Out	— Dolby Digital
	DTS Out	— DTS 3 PCM
	Linear PCM Out	— Down Sample On
	MPEG Out	— MPEG 3 PCM
	Digital Out	On
		Off
	Move	SETUP	Exit

Settings: On (Digital bitstream is output)

Off (Digital bitstream is not output)

Expert

denotes more detailed settings. If the item is not displayed, please refer to page 42 to display it.

44