Integra DPS-7.3 instruction manual Setting the Audio 2 Options, Audio Out, Speaker Setting

Setting the Audio 2 Options

■Audio Out

If you connected this player to your amplifier using the 5.1 channel analog outputs (front, surround, center and subwoofer outs), set this to [5.1 Channel]; if you connected only the stereo outs, set to [2 Channel].

A1	Audio2	Video1	V2	Language		General
		Audio Out			2 Channel
	Speaker Setting				5.1 Channel
	Setting up audio output
	Move					SETUP Exit

Settings: 2 Channel (Factory setting)

5.1 Channel

Note

•Even if you set [Audio Out] to [5.1 Channel], you’ll only get sound from all speakers when playing a multi-channel DVD-Audio disc, or Dolby Digital, DTS or MPEG encoded DVD disc.

•If you set to 2 Channel, Dolby Digital, DTS and MPEG audio is mixed down to two channels so you still hear all the audio recorded on the disc.

•Some DVD-Audio discs don’t allow down-mixing of audio. These discs always output multi-channel audio regardless of the setting made here.

■Speaker Setting

You only need to make this setting if you connected this player to your amplifier using the 5.1 channel analog outputs.

Setting the size and position

Follow the on-screen displays to describe which speakers are in your system and their sizes and positions.

Set the size of your speakers in the Size screen. The front left/ right (L/R) speakers have a fixed setting of [Large]. The center (C), left surround (LS) and right surround (RS) speakers can each be set to [Large], [Small] or [Off]. Set a speaker to [Large] if the main speaker cone is 12cm or more; set to [Small] if the it’s less than 12cm. Note that the LS and RS speakers cannot be set independently.

The subwoofer (SW) can only be set to [On] or [Off].

Setting the distance

Set the distance from your main listening position to each speaker in the [Distance] screen. The distance setting for any speaker that was set to [Off] in the [Size] screen will be grayed out. For the other speakers, enter the distance to the nearest 0.1m (10cm). You can set the distance for the L/R speakers between 0.3m and 9m. Note that you must set the C and SW speakers within 2m of the L/R setting. The LS and RS speakers must be set within –6m and +2m of the L/R setting.

The graphic on the right of the screen represents your speaker setup, with the currently selected speaker’s name highlighted in blue, and the speakers set to [On] highlighted in yellow.

A1	Audio2	Video1 V2 Language			General
		Audio Out — 2 Channel
	Speaker Setting			Start
	Setting the speaker
	system configuration
		Move	ENTER	Select	SETUP	Exit

A1	Audio2	Video1 V2		Language	General
	Speaker Setting
		Size		L		C	R
	L/R	—	Large
	C	—	Large				SW
	LS	—	Large
					LS		RS
	RS	—	Large
	SW	—	On	RETURN Return
	Distance		ENTER	Select	SETUP	Exit
Factory Settings: Center:								Large
				Subwoofer: On
				Surround:				Large
				Distance:				All 3.0m

45